Jump to content
SAU Community

Dont Have A Full Clutch Pedal

ltcree
 Share

Recommended Posts

ltcree Contributor

ltcree

Posted
Posted (edited)

hey guys, on the way home today i lost part of my clutch travel, it'll just engage gears but as you put it in it'll slightly move, so the clutch isn't fully disengaging. I've checked for leaks and tried bleeding the system which hasn't helped, check the pedal bracket (which i weled 6 months ago) which is ok. the only other thing is the clutch pivot bolt. is there any way of checking it without taking out the g/box? also since the thrust bearing has had a slight bit of noise like its riding. any help much appreciated.

Also about half the pedal is freeplay, i tried adjuting it and it got better but it should unadjust itself! Anyone thats had a pivot bolt break what sort of pedal did you have?

Edited by ltcree
Link to comment
https://www.sau.com.au/forums/topic/206343-dont-have-a-full-clutch-pedal/
Share on other sites
Habler Rising Star

Habler

Posted
Posted

It could also be a broken spring in your clutch fluid cylinder. Easy to check - just unbolt it off the firewall and open the sucker up. I broke the pedal bracket in my old 32 like you, welded it up then broke a spring in half in the cylinder. It now has a stronger spring in it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB25DE NEO with Haltech ECU

      By GTSBoy · Posted

      Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • Kinkstaah
      Duncan's V37.......race car?

      By Kinkstaah · Posted

      What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Yeah, Duncan is helping sell me back to Android devices. I've hated the whole Android head units due to their speed issues. Even in my old Hyundai Kona (2022 model), it behind the scenes was Android, and slow and shitty to start up. Once running wasn't bad, but still a good 15 to 30 seconds.
    • PranK
      spot the stagea

      By PranK · Posted

      My roof rails are off atm on the E39 until the rust is fixed. I did find another little bit of surface rust under the rails when I took them off. As @soviet_merlin said I'd just leave them alone unless you're planning on ensuring they're properly sealed. I was on the fence about leaving them off as the delete is still a thing in BMW E39's but I feel like the car is missing something (er, it is, der) with them off and I'm looking forward to putting them back on.
×
×
  • Create New...