Jump to content
SAU Community

Recommended Posts

$600 is way too much

Get them and take them into a local panel shop, be realy nice to the guys in there and just say to one of the guys working that you will give him personally (not the shop, but the worker) $300 if he paints your covers in JWO after hours and there's no rush on the job

$600 is way too much

Get them and take them into a local panel shop, be realy nice to the guys in there and just say to one of the guys working that you will give him personally (not the shop, but the worker) $300 if he paints your covers in JWO after hours and there's no rush on the job

I agree, $600 is way too much and N1GTR has the right idea about approaching a painter in your local panel shop. For $600 you're probably still getting used covers that are just repainted. In korea I can get my RB26 covers painted at a panel shop for ~$250 USD so I'm sure you can get it for about the same in Aus. It's expensive in japan to buy newly painted covers.

Prices for Nissan OEM Painted brand new covers from Japan...

Black

Rocker cover EX side $219 USD

Rocker cover IN side $219 USD

Rocker Ornament cover $263 USD

Front cam pulley cover $315 USD

Red

Rocker cover EX side $210 USD

Rocker cover IN side $210 USD

Rocker ornament cover $242 USD

Front cam pulley cover $125 USD

Gold

Rocker cover EX side $305 USD

Rocker cover IN side $305 USD

Rocker ornament cover ???

Front cam pulley cover $181 USD

I would expect JWO to be more expensive... just to give you an idea.

Edited by chak8080

Go and see Mick at Micolour, He has done plenty.

And well priced too.

I THINK its around $110ish a piece to paint maybe a touch more, you would have to check with mick.

And he is able to remove them off the car and reinstall if required,

although taking in just the pieces is easyer

Edited by vsute
Go and see Mick at Micolour, He has done plenty.

And well priced too.

I THINK its around $110ish a piece to paint maybe a touch more, you would have to check with mick.

And he is able to remove them off the car and reinstall if required,

although taking in just the pieces is easyer

yeah sounds good

ill give them a call tomorrow

or i might even visit them to see what they can do about my scratch on the side of my car too! :D

Go and see Mick at Micolour, He has done plenty.

And well priced too.

I THINK its around $110ish a piece to paint maybe a touch more, you would have to check with mick.

And he is able to remove them off the car and reinstall if required,

although taking in just the pieces is easyer

ouch $550 for the cover set

not much choice really if mil jade is required.

yep i mentioned that before

depends on what your doing with the car i guess :rofl:

just when i think of it , its normally about $800 for a 4 piece body kit to get painted .. engine covers are so so so much smaller lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...