Jump to content
SAU Community

Recommended Posts

$600 is way too much

Get them and take them into a local panel shop, be realy nice to the guys in there and just say to one of the guys working that you will give him personally (not the shop, but the worker) $300 if he paints your covers in JWO after hours and there's no rush on the job

$600 is way too much

Get them and take them into a local panel shop, be realy nice to the guys in there and just say to one of the guys working that you will give him personally (not the shop, but the worker) $300 if he paints your covers in JWO after hours and there's no rush on the job

I agree, $600 is way too much and N1GTR has the right idea about approaching a painter in your local panel shop. For $600 you're probably still getting used covers that are just repainted. In korea I can get my RB26 covers painted at a panel shop for ~$250 USD so I'm sure you can get it for about the same in Aus. It's expensive in japan to buy newly painted covers.

Prices for Nissan OEM Painted brand new covers from Japan...

Black

Rocker cover EX side $219 USD

Rocker cover IN side $219 USD

Rocker Ornament cover $263 USD

Front cam pulley cover $315 USD

Red

Rocker cover EX side $210 USD

Rocker cover IN side $210 USD

Rocker ornament cover $242 USD

Front cam pulley cover $125 USD

Gold

Rocker cover EX side $305 USD

Rocker cover IN side $305 USD

Rocker ornament cover ???

Front cam pulley cover $181 USD

I would expect JWO to be more expensive... just to give you an idea.

Edited by chak8080

Go and see Mick at Micolour, He has done plenty.

And well priced too.

I THINK its around $110ish a piece to paint maybe a touch more, you would have to check with mick.

And he is able to remove them off the car and reinstall if required,

although taking in just the pieces is easyer

Edited by vsute
Go and see Mick at Micolour, He has done plenty.

And well priced too.

I THINK its around $110ish a piece to paint maybe a touch more, you would have to check with mick.

And he is able to remove them off the car and reinstall if required,

although taking in just the pieces is easyer

yeah sounds good

ill give them a call tomorrow

or i might even visit them to see what they can do about my scratch on the side of my car too! :D

Go and see Mick at Micolour, He has done plenty.

And well priced too.

I THINK its around $110ish a piece to paint maybe a touch more, you would have to check with mick.

And he is able to remove them off the car and reinstall if required,

although taking in just the pieces is easyer

ouch $550 for the cover set

not much choice really if mil jade is required.

yep i mentioned that before

depends on what your doing with the car i guess :rofl:

just when i think of it , its normally about $800 for a 4 piece body kit to get painted .. engine covers are so so so much smaller lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
    • The BES920 is like the Toyota Camrys of coffee machines. E61 group head is cool, however the time requirements for home use makes it less desirable. The Toyota Camry coffee machine runs twin boilers and also PID temp control, some say it produces coffees as good as an E61 group head machine.
×
×
  • Create New...