Jump to content
SAU Community

Recommended Posts

I was talking to Richard from www.are.com.au the other day and he told me something that is a bit disturbing....

He has a R33 gtst that he has been working on and finally got it back on the road. Took it to the dyno and made a power run, the result was a bit dissapointing and they were trying to figure it out when the guy asked Richard what fuel he was running. "Optimax was the last fuel put in the car" Richard replied, "When was that?" the dyno opperator asked, "About 2 weeks ago". the dyno opperator then explained that Optimax is only good for about 1 week then its RON rating starts to fall. So he tipped in some octain booster and then ran the car again and made just under 20rwkw EXTRA once the RON got back up. This explains why on a number of occasions after doing a couple of weeks work on my car the dyno runs have been down on power and the car detonates easilly.

Cam

Link to comment
https://www.sau.com.au/forums/topic/207-more-bad-optimax-facts/
Share on other sites

PULP [Premium Unleaded Petrol] is different to Optimax and Ultimat as it has a lesser RON that these other fuels.

It seems that the consensus is that BP Ultimate is better than Shell Optimax and even tho it all comes from the same place BP & SHELL have it mixed to their own specs and it seems that BP is better at producing consistant RON readings and lasts longer at a higher RON.

Cam

I've had problems with optimax twice now...I've found it more to do with the actual petrol station than the optimax itself...

The shell on para rd, just past stanmore maccas is the worst!

Do not buy from there...I know plenty of people that have had bad fuel from there...I've had to have my system completely flushed and my injectors ultrasonically cleaned coz of them!

  • 3 weeks later...
Guest Miguel

I just used BP Ultimate for the first time last week, and by my seat-of-hte-pants testing, I feel that Optimax is better. I'm sure I heard some slight pinging with the Ultimate at higher revs.

That said, I know of an Evo & an Sti that required rebuilds due to some sludgy residue left in the fuel filter and Optimax was deemed responsible.

Guest Miguel
ive got r33 and have always run ultimate, is it worth putting in an octane booster as well or is that just too much. if i do put in a booster as well is the timing sweet how it is?[/quote:bc23bd7840]

I find with Octane booster & Optimax, my car revs much more freely, it doesn't feel restricted up high. I spose with a higher octane rating, you could fiddle with the timing if you wanted to, to get even more out of it

steve, all the vp fuels with a high ron do contain lead which is a shame. i'm sure the cat or your oxygen sensors will not like you using these fuels at all.

don't quote me but i remember hearing that c-10 is ok to use. again, don't quote me.

i posted the vp's as a point of reference for john.

Optimax and Ultimate are not PULP[/quote:da32e47ddc]

'course not. BP manufactures the pulp and sells it to everyone as a raw product. they in turn mix their additives which make it 98RON. it's like you putting in an octane booster in with your fuel but way more technical

it just makes cars more resistant to detonation, that's all.

We have been using Optimax since buying the car last September and never had it ping and I Snot it big time!!!!. I really do give it a hard time.

We are standard apart from 5 Zigen cat back. We have used an Octane booster once and could see no difference at all,,, actually we used it on the Canberra run. I have used the Synegy once and it was no better, then again it didn't ping either. After doing some checking,,,Mobil says there's is guaranteed 98 and Shell is around 96....Stuffed if I know,,,,but I'm sticking with Shell at the moment.

We have a station 5 minutes away and racing the guy next door with his Commadore running 350kw's at the treads on full tanks is a ball. You can hear me now,,,Get out of my way you sideways dickhead.....What you can't stop,,whats wrong buddy,,,Oh thats right is a Holden.

Neil.

We have been using Optimax since buying the car last September and never had it ping and I Snot it big time!!!!. I really do give it a hard time. [/quote:b3222afdc9]

Neil, your car has definately pinged, you just don't realise it.

Unless you have a sensor you can't really tell how much detonation goes on.

Nah Onarun,,,,I think,,, at my ripe old age I know if she's pinging or not. I don't think I really need a gauge to tell me that,,,turning the stereo off and listening to her reving to full song under load is enough evidence for me. Remember I'm basically stock,,,which means tons of fuel. I'm with you Shell,,,,the Mobil is also only down the road,,, used a tankfull last week and noticed no difference. My ultimate test will be tomorrow night when I get my neibour with his hot Commadore using Mobil..............

Oh and by the way,,,,,C10 and Cats/02 probe/Cat Heater are like,,,,shit I hate you and I'm gonna stuff you up big time. Don't use it!!!!!.

Neil.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...