Jump to content
SAU Community

Recommended Posts

MisterTwo,

a friend of mine took his car (R32 GTS-T) to Technik Tuning for the first time not that long to get his Unichip tuned for 20psi (as his unichip was tuned for 16-17psi) and when they gave him a prinout of his power/AFR and power/MAP to show that it was on 20psi he thought it was all sweet (but a bit down on power 195rwkw compared to 222rwkw) until he drove it home only to see that it was back on 15psi and that it felt slower than b4.

He called them up later on to ask what the deal was and they told him some crap excuse that they couldn't control boost up near 20psi so they turned it back down to 15psi and tuned it there.

That's all fine, but they didn't tell him that when he picked up the car so that's dodgy if u ask me.

Also, how do you figure that $300 later, your car is going slower than what it was prior to the tune.

So, given this i'll let you make your own decision, but fyi, you won't go wrong with Ben from RacePace Motorsport and your money will be very well spent. He is a gun when it comes to Skylines and Power FCs not to mention all other ECU's and he takes a lot of pride in his work.

FYI, he is the guy that tuned Leewah's GTR which made 495rwkw at the MAS in his R33 GTR. He also built his R33 GTR which is making a shit load of power aswell.

Link to comment
https://www.sau.com.au/forums/topic/20711-dyno-tuning/#findComment-435506
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, fun day was had, I finally found a house that will do me just fine, 1980's brick build, but with full fresh renovations, plus new colour bond fencing all round so puppies are incoming 馃悤, and water tanks for the garden, and it's located in West Goulburn..... @Duncan 馃, so day trips to Wakie to watch cars going Zoom will be on the cards In the end it cost well under my budget and was actually better than alot of the more expensive joints I was looking at, it is in a good area, close enough to the shops, public transport, and the Wollondilly River Weir,  and the great walking paths along the river, but far enough away from town to see minimal traffic The deposit is dropped, the conveyancer is conveyancing and I should get the keys in a week or 2 as the property is currently unoccupied  As with everything I own, I'm doing up a modifications list, as it doesn't have solar, that is first up on the big list, all of the panels and enough batteries to keep the joint warm, or cool, followed by a largish carport out the front, the small list, which will start as soon as I have keys, is some security stuff, like cameras, screens, and the usual "crazy prepper" additions that weird old people like (mouse holes to stick shot guns out of, and the usual man traps that the average person installs for the unsuspecting and unwanted guests 馃ぃ) The gardens front and back are OK, but, not to my standards or liking, so landscaping will be a fun job to start getting into, so when spring is sprung I'll do a heap of planting, lots of natives and vegetables is the plan, the old owners were more "Old English Garden" type, so basically Roses and other weird looking things that are destined for the green waste bin One thing that is staying garden wise is a nice established hedge out the front, it is about 5 foot tall and covers the whole front of the property from prying eyes As for the car hoist, the roof in the garage has some height to it, but, I'll need to get an installer out to see what can be done, width wise may be a issue, but my building inspector will be getting back to me over the next week with his recommendations  Small, but cosy     
    • I tried to get in contact before I went to QLD you didn鈥檛 respond, then I tried to contact you in r31 club.  I thought you fell off the earth or something haha.  I will grab it off you but unknown when I will be up that way 
    • I think that might be in the question. He is going very low, and I think the standard GTR ones are simple tripod joints (like the rear NA/S chassis ones), not proper CVs (like R chassis turbo/GTR ones). Proper CVs take the misalignment better than tripods.
    • Do you still need the wiper motor and stuff?
    • I haven't used the Crank Motorsport ones, but can I ask why not use standard gtr/gts4 axles at the front? They would easily cope with that power level. BTW.....sounds like quite the project!
  • Create New...