Jump to content
SAU Community

Recommended Posts

mine is sorta resting on the bottom of the tank which makes it louder, when the fuel gets hot on a hot day you can really hear it outside the car, buzzing its ass off. it'll be fine mate. FWIW the walbro pumps are quieter but who cares when you got a decent exhaust anyway

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665270
Share on other sites

it is pretty loud, but not unbearable.

yea they are supposedly rated to 400hp. they are only loud when priming, and i can only just hear it on idle when i blip the throttle when the stereo is off.

but overall it gives great bang for buck.

5/5

but 3/5 for its power capability

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665277
Share on other sites

Ive had issues with mine, and am taking it back to the workshop to try a different pump as i have had starting issues ever since installing the 040. it holds fuel pressure fine though and has no trouble holding sub 12 afr's on full boost, but starting the car sometimes sucks!

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665281
Share on other sites

If i can only 'just' hear it at idle i can live with that. Anything more though and i'd probably get pissd.

Hey! I hope i don't get starting issues. My mate has one and recommends it, never had starting issues. Did you install it yourself and stuff it up? Hehe

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665298
Share on other sites

yea mate....seriously all u will hear is a buzz and hiss on priming.

and other than that u cant hear it.

i only heard it because i was REALLY listening for it.

but its not like 90db or anything..

no one will be like , WTF IS WRONG WITH YOUR CAR DUDE.

lol

Edited by r33cruiser
Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3665306
Share on other sites

I got one for my R32 GTR, but swapped it and another $200 for a sard. The 040 didnt fit into the nicely engineered cradle, so i would have lost fuel pickup depth and sound/vibration isolation if i had used it. The car already surges on 1/4 tank at the track... For GTS-T YMMV.

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3667029
Share on other sites

Bought it today from CRD. Will be fitting it over the weekend. I'll post comments if anything interesting happens.

I got one for my R32 GTR, but swapped it and another $200 for a sard. The 040 didnt fit into the nicely engineered cradle, so i would have lost fuel pickup depth and sound/vibration isolation if i had used it. The car already surges on 1/4 tank at the track... For GTS-T YMMV.

I agree with you, the gtst will never surge like a GTR so i think it should be fine. Plus my car won't see the track that much.

The nismo 275lph pump comes with its own cradle and touches the very bottom of the tank.

It shits all over any bosch.

Oh, and its quiet - I can't hear it at all.

You're right but for half the price i think it's a good compromise.

na didn't install myself had it done professionally by a workshop then checked by another workshop as i was sceptical of the install and they have said it was installed fine

Ok dude, you're a mix between paranoid and OCD. :P

Nismo bolt ins, are for gurls :banana: lol

For the cost of em, you'd want them to be quiet (undoubtedly they use a fuel resistant insulation, like factory)

Lol. I'll agree with that one, only cause it makes me look tougher ;)

Link to comment
https://www.sau.com.au/forums/topic/207176-bosch-040/#findComment-3667558
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • UPDATE: Yes the GSP Axles are compatible. I installed it on my R34 today and they are working a treat! Turns out that the S13, S14, S15, and 200 SX all used the same axles as the HR34, and ER34 NA models. Which is 2 bolt x 3 pairs.  
    • Also build this EH ute with 370z motor and gearbox with a couple of turbos just for fun.  
    • Got the passenger door on plus the master cylinder and booster. Loaded up to take it home. At home, the colour changes a lot in the light.
    • Nothing cheap, but I have seen the AC Hydraulic DK13HLQ which is pretty close to what you're asking for. The problem is the hydraulic cylinder mandates that the back of the jack be a certain height and Skylines have fairly deep inset floor jack points. A more certain and cheap option is to get some nominal 2x10 inch lumber boards and have one board be 1.5 feet, the other board 3 feet. Glue it all together with lots of clamps to maintain pressure. Make two of these. The ramp suggested above is a good idea, it takes quite a bit of clutch slip to get over each of the boards. I only need the first ~1.5 inches for my low profile jack on a standard ride height car but a lowered car you want to go up to the full ~3-3.5 inches. Paint it or store indoors if you want it to last.
    • Ok. And Nistune? I read (here too) mainly on Stagea threads that it can by "turn off" with Nistune. But they say they still had the sensor plug in. Next week iam going to the Nistune(and other ECUs) tuner so i can finally make it work. I drove the car home and apart from the cut it drove great. No misfire no smoke no hesitation or rough start...so hoping it is this sensor that is missing  
×
×
  • Create New...