Jump to content
SAU Community

Recommended Posts

Hi all

R34 GTT 2 door coupe coilovers - Aus spec Tein Super Streets

They are in excellent condition, no leaks, nothing broken, nothing is wrong with them. I still have the original Tein stickers, C-spanners, allen keys, documentation, everything!

They were bought from Wholesale Suspension in Penrith and fitted by them.

Fulcrum Suspension spec. So are valved for Australian conditions as they are advertised. RRP was $1850 when I bought them.

I've done 11000kms on them. You still have 29000kms/1 year warranty from Wholesale and Fulcrum on these. If there is an issue, simply get it checked out and make your warranty claim. Easy. I can provide you the Fulcrum warranty certificate and receipts.

Spring rates are 5k front and 4k rear which are very decent rates, and they handle superbly. Very very predictable. They also allow a good deal of adjustment, I have my car at the momment at 345mm all around, and I am sure it can go lower another 10-15mm if needed. Else you could even run them at stock height. They have 16 damper settings.

Selling as returning car to stock.

$1000

PM me or call on

post-7128-1203837732_thumb.jpg

post-7128-1203837843_thumb.jpg

post-7128-1203837955_thumb.jpg

post-7128-1203837985_thumb.jpg

post-7128-1203838060_thumb.jpg

post-7128-1203838081_thumb.jpg

post-7128-1203838103_thumb.jpg

post-7128-1203838133_thumb.jpg

post-7128-1203838145_thumb.jpg

post-7128-1203838156_thumb.jpg

  • 1 year later...

hi i was wondering if you still have these coilovers still i have got a r34 gtv which is non turbo would it fit on my car if it does i will give you 700 cash straight away plz msg back asap thanks or pm me

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...