Jump to content
SAU Community

Recommended Posts

Hey all,

Well, I've just received my Skyline and have been crusing around of late, showing off my new baby to friends and family etc. The only problem though, is that I seem to be having a problem negotiating steep driveways. I've only had my car for a week, and my bumper is already horribly scratched.

Fortunately I'm not too concerned as yet, as I'm getting the front bumper sprayed soon, but what should I do in future?

My car is a R33 with the standard M spec kit. It's sits slightly lower on a set of non-adjustable set of Teins, but still it's nothing ridiculous.

May I ask, has anyone else had this problem? My driveway is kinda steep, and I have already scratched it a couple of times regardless of how slow I go. Is there anything I can do?

Any comments will be greatly appreciated. Thanks!

man you should see the bottom of my front bar, sure its pretty scratched up but you cant really see anything much unless you take it off ( i did last night and actually felt pain when i looked at all of them) as long as you dont crack it or snap it off completely by flying up a almost vertical driveway at high speed, dont stress yourself about it.

Dude who owned my car last had the front bumper reinforced with fiberglass along the inner edge at the bottom at the front. Mine scrapes on my drive if I dont take it at a sharp angle. With the reinforcing, I have belted a man hole cover that was sitting up and it saved the front bar from being completely ripped off.

ive had this problem before. 10metres before the driveway, i used to drive a bit on the wrong side of the road and go in on about a 30deg. angle. i had heaps of space either side of the driveway so i was sorta lucky and it was the layback kinda kerb. hope this helps :D

I have the same problem. I called the council 4 time b4 they sent someone out (my driveway is fcuked). The first time I called I told them I was happy to pay for the drive if it needed to b redone. But now they can shove it.

Hey Guys, thanks for the replies.

Jimbo2000, yeah, I know, its pretty much unnoticable, but I'm going to get my front bar resprayed, so yeah, all psychological i think.

Bl4cK32, reinforced bumpers ay.......hmm, if I only knew where it could be done. Would be a great idea though.

rb25, i see what you mean by doing a sweeping turn to go into your driveway, but I don't get how that stops the scraping, can you please possibly advise further? I guess my problem is that I live in a court also.......doesnt help does it! :D

Evil, yeah, get the council to pay it........that's what they're there for right!

Just take any driveway sideways!!! :D Best advice I can give!! Sometimes you'll scrape the bar, sometimes you'll be lucky!

I learnt this when my b/f had his walkinshaw and had to go over anything and everything sideways! And then he gets into my car which is at least 2 inches higher, and scrapes the side of my front bar....not happy Jan!!

heheehe my front bar is damaged and absolutely farked ... in fact theres nothing holding it on 1 side cause that sides damaged hehee and at the bottom its cracked cause i went over something which i should have ... i'm getting it all fixed next week .. woo hoo :D but after u learn ur car u know what u can and can't do ... takes a bit of time to get used to driving around being careful all the time ..

My driveway is horrible

My current place the Cat scrapes on the gutter when leaving.. (not that it worries me)

My mums place is worst, I have to reverse in after carefully placing bricks on the lip of the driveway. I think I will have to get creative with the cement one day.

My Driveway is farked.

I have to park on my property at night and my car ALWAYS scrapes, if i turn left into my driveway and reverse left out of my driveway it scrapes a bit. but if i enter my driveway from the right or exit it turning to the right i rip my whole front bar off ;)

oh well... ;)

Shane, yeah, thats the same as me.... I scrape going down a slope, not up..... I think its the fact that when you go up a slope you can get one of the front wheels to start climbing and lift the bar up... but when you go down its hard to get one wheel onto the bottom of the driveway no matter what freaking angle I go on!!!

Scotty - living in a cul-de-sac head doesnt help, but taking the kerb on the angle works well. the more 'parallel' you can get with the kerb the better. keep the angle to a minimum, you might have to get right over the other side of the road, but it aint a problem if you live in a cul-de-sac. get one of your mates to try it and you'll see how the bar gets up without scraping. ;)

cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
    • Run some injector cleaner through it I had a similar issue that plagued me for months, even tried replacing the cat. If one or more injectors are blocked up the ecu sees ping so pulls timing and makes the tune rich overall, you'll see black smoke coming out of the exhaust and like me assume it's running rich but it could only be one or two cylinders  $10 bottle of injector cleaner and the next time I hit boost it pumped out a huge plume of black smoke, cleared the blockage and then ran great, if that's not the issue it's only a cheap thing to try haha  
×
×
  • Create New...