Jump to content
SAU Community

Recommended Posts

I rolled over 120k a few weeks ago... and I'm fairly damn certain that my Ks weren't tampered with cause it was a log booked car in Japan that had hit just under 100k and the dude sold it, and said the service had to be done...

However, once it hit 120k, the 2 doesn't line up perfectly... It was rather upsetting when it didn't drop all the way down... but I'm still confident that the Ks weren't rolled back...

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

If yours were straight before then its all good I'd say, its only because they are not made to be wound back, so it always leaves them misaligned, unless the guys spends alot of time winding it back till they all sit straight (which could take a very long time and could wind it back all the way lol)

Booked in for monday at Gas Tune in tuggers. They said they can check the odometer for just under 50 bucks. They said they can't provide a legal document but i guess once i know if it has been altered then i can go further and find someone who can provide a document saying that it has been wound back etc.

Booked in for monday at Gas Tune in tuggers. They said they can check the odometer for just under 50 bucks. They said they can't provide a legal document but i guess once i know if it has been altered then i can go further and find someone who can provide a document saying that it has been wound back etc.

my numbers dont line up either - and you know what - i think its been rolled back!

wanna know how i know - cos its an imported skyline..

you're wasting your money IMHO..

I really wish that you could do something about this -0 as there is nothing worse than being ripped off with a car with low low kays, to find out at best its average kays.

I'm not sure you are going to be able to do anything. You'll probably cop a whole heap of "We didn't knows" from people - and everyone WILL pass the buck. The yard in Japan will say its the importers, the Importers will say its the dealer - or auction or something.

I wish you all the best, but will be suprised if anyone does anything for you - even though thats total crap.

when you say your gearbox is stuffed, do you mean the syncros are playin up or something more serious? because it is very posable for syncros to play up at even less ks than yours if cogs are grabbed hard on cold g/b oil!

brett

If your odo doesn't line up it is most likely it has been wound back.

As for getting any help from the importer or much worse the Jap car yard i think you are fighting a loosing battle. It is quite common for odometers to be wound back or replaced and in the jap engineers report will actually say this.

All the car yard is going to say is that to there knowledge it had not been wound back and you will waste a lot more in court than a repair to a gearbox for a case you most likely won't win.

And seeing as all the power has been taken from gov branches like fair trading and the like you will be in for a expensive court case.

Sorry but its the reality

I had the gearbox pulled apart a couple of times, ahd the syncros done, oil, bits of metal removed etc. Sometimes it won't go into gear (even when warmed up) and creaks when using the clutch.

Taking it to Trojan sometime soon for them to have a look. just hard as im southside, got uni and work etc...

Edited by 33Sedan

I know my chances are slim but i think its worth a try.

PS:

Motor Car Traders Act 1986 - SECT 38

(4) A person must not, in the course of selling or exchanging a motor car,

falsely represent the accuracy of an odometer reading of the car.

The Motor Dealers Act (The Act) makes it illegal to interfere with an odometer. It states that the following actions are deemed to be interference:

* altering the reading of the odometer

* removing or replacing the odometer

* rendering the odometer inoperative or inaccurate by any means whatsoever

* fitting a device capable of rendering the odometer inoperative or inaccurate.

A dealer is also prohibited from advertising or specifying that the reading of an odometer is accurate if the dealer knows or has reasonable cause to know that this is not the case.

If they have any doubt that the clock may have been wound back, and then sold it knowing that and advertising it as less Km's, AND considering their job is to import japanese cars which alot have been wound back, they should know of the problem and look out for it, OR notify the buyers that it may have been wound back.

Otherwise if I was a house salesman and sold you a house that i said was made after the 1990's, while really it was made in the 1960's and has Asbestos in it lol. In skyline talk it has problems related to being used much more...

This is the argument that i see playing out anyway.

I don't care if nothing comes out of it, atleast i gave it a shot rather than thiking nah its too bigger a deal and i couldn't be bothered.

If you ask the dealer, "Do you get many import cars in that have their Odo's wound back?"

They will obviously reply back "Yes we do"

"Have you sold these vehicles? Do you have a system to find out if they have been wound back? Do you notify your customers that the km's probably arn't genuine? Do you sometimes suspect some imported cars have been wound back, but do nothing about it?"

I can see why your doing it, all I'm saying is that it may not be easy, and may not be best to keep talking about it here, if your going to take it further.

I'm pretty sure my kms have been wound back, since my log books state that my car was serviced at 122k odd kms in japan, when I bought the car it only had 94k or so k's, but I sought of thought that would be the case, and went into the purchase expecting that. Considering the engine was replaced and other work had been done, I thought it would even out.

i personally thought when buyin an import.. you expect the odo to be messed with...

So ive heard, its just how it is...

When buying a car, you look and its all round condition, not the Km's and just work off that..

all depends on how the car was treated... maybe your car has done either 99 or 120k, it also could of been a hard life for the gearbox.

hey this kinda happened to a mate of mine altho he bought his here not import it himself. this was roughly 3 years ago. car was daily driven and saw many cruises and such. When selling it his gf's mother who used to actually race cars (and is strange cos we get alot of protocol and paper work advice from her lol) anyway she traced the paper work right back to compliance here and when it left japan. now the kms dropped that dramatically between japan and here that even with 3 years of driving the car still had not hit the kms it was reading before leaving japan. its a common thing with any import i guess.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...