Jump to content
SAU Community

Recommended Posts

HI guys, I will be getting my HKS GT2835 Pro S soon, just wondering, for the people that have it, does it still have that nice spool jet sound that the standard turbo provides?

You'd think it would be louder since it's a bigger turbo, am I correct???

I would hate to have it installed and it makes minimal spool noise, Id be heart broken! lol :)

cheers

And what about the flutter, I love my flutter... Will the flutter be louder than the standard turbz? I should be, bigger turbo yeh?

I would suggest a Recirculating BOV, as it will make your turbo last longer.

Also, sounds like you want attention?

Cops will love you.

This one is better:

http://users.on.net/sau/pacey.avi

Port shrouded is a "windowed" compressor cover

Looks like this:

Lol, still dont get what you mean, that just looks like a normal turbo to be that dont have a filter and not connected to the cooler...

ps. your vid didnt work :)

I would suggest a Recirculating BOV, as it will make your turbo last longer.

Also, sounds like you want attention?

Cops will love you.

F#$k recuirculating, I just wanna hear that biatch flutter.... Took of the plumb back stocky BOV, flutters real good.

So will the HKS GT2835 Pro S Flutter louder?

ANd also, will the HKS GT2835 Pro S turbz maker the spool sound yours did?

CHeers

spool will be louder than stock as the wheel is steel, your pushing much more air, and running a pod (no doubt)

all these things will make it a fair bit louder.

My old GT30 sounded like an aircraft once i plumbed the gate up :)

i've got a link for my vid somewhere, but you cant hear a lot over screamer pipes :)

This one is better:

http://users.on.net/sau/pacey.avi

Port shrouded is a "windowed" compressor cover

Looks like this:

Im about to bolt on one of those,external gate though :)

F#$k recuirculating, I just wanna hear that biatch flutter.... Took of the plumb back stocky BOV, flutters real good.

So will the HKS GT2835 Pro S Flutter louder?

ANd also, will the HKS GT2835 Pro S turbz maker the spool sound yours did?

CHeers

You dont want it to "flutter" your turbo wont last long.

lancers have mad flutterz and spool noise. Buy a lancer and its a straight fit for a triton diesel turbo to go on. Will be faster, be more cuztom, and flutter way more.

You dont deserve a nissan

Vid please! What were the specs of that motor?

ok... found it Click me!!!

GT30, 45mm gate, Nismo (factory GTS-R) manifold, RB25 (built), factory head/cams :down:

24psi/104 sunoco, thats the major stuff anyhow

ok... found it Click me!!!

GT30, 45mm gate, Nismo (factory GTS-R) manifold, RB25 (built), factory head/cams :down:

24psi/104 sunoco, thats the major stuff anyhow

GT3040?

Guest
This topic is now closed to further replies.


  • Latest Posts

    • I was just driving into work and while on my drive, I went to accelerate and noticed the car would sputter/hesitate and I’d hear a few pops from the exhaust before it started going faster. Then I also noticed that when I push my clutch in, the car would die. This all started happening today. Any ideas?
    • That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
×
×
  • Create New...