Jump to content
SAU Community

Recommended Posts

Looking to wreck my 33 GTS-t that happened late last year when some clever old lady thought it might be a good idea to run a red light. I bought the car back off of the insurance company and have had it sitting here since as I've been too busy with work and other commitments to do anything with it. In the last few weeks I've sold off the turbo and exhaust but everything else is still there. She cleaned right across my front so headlights, front bar, rad support are all rooted. I tried turning over the motor after getting the wreck back and can confirm it still runs fine. Car has approx 130000km's on the clock. Interior is mint condition apart from the dash and steering wheel where the airbags have deployed but seats, trim etc are all fine. She ran on white 17' BuddyClub P1's and I just put new rubber on them probably two to three weeks before the car was totalled so the tyres would have done under 1500k's.

Looking at getting around the $4000-5000k for the wreck, honestly I don't know if this is too steep but it's a starting point and I'm willing to negotiate. If there is enough interest in parts I will also be willing to strip the car off and sell parts individually...

Edited by heslo
Link to comment
https://www.sau.com.au/forums/topic/208148-1996-r33-gts-t-wrecking/
Share on other sites

Most have been sold off already buddy, still have an RB25 PowerFC with hand controller and boost controller but I'm 99% sure that's spoken for by Madaz

Most have been sold off already buddy, still have an RB25 PowerFC with hand controller and boost controller but I'm 99% sure that's spoken for by Madaz

yes spoken for :blink: Luke is my Angel , my knight in shining armour :thumbsup:

Luke im looking into getting my turbo reconditioned and am willing to put back on you engine so it is a DET again

how much u looking at for the motor and box together?? not worried bout the turbo or manifold. Id need the wiring loom and computer (if u have the stock one). And r the front calipers and rotors ok or were they damaged in the accident?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...