Jump to content
SAU Community

Recommended Posts

Selling this item brand new in the box comes with valve spring and solid lifter as well. Price will be selling for $2000 and Sard 1000cc injector brand new $900.

Edited by Hoshima
Selling this item brand new in the box comes with valve spring and solid lifter as well. Price will be selling for $2000 and Sard 1000cc injector brand new $900.

Sorry just want to be clear. So you'll be selling the Cams with valve springs and solid lifter for $2,000? And Sard injectors for $900.

Sorry just want to be clear. So you'll be selling the Cams with valve springs and solid lifter for $2,000? And Sard injectors for $900.

Yeah thats right :)

Edited by Hoshima
  • 2 weeks later...

Yeah i know that why i said price is negotiable for the whole package if the price is reasonable. i will let go for a good price, so can make a offer whover interested of the cams, injectors, valve and the solid lifter :banana:

Edited by Hoshima

All this item brand new in the box, Updated:~

Hks Cams 272 IN/280 EX Stage 2 Rb26 10.2 lift AUD $1100

HKS Step 2 Valve spring AUD$450

Tomei Solid Lifters AUD $500

Greddy Oil Pan Kit AUD $500

Sard Injector 1000cc AUD $900 {{{SOLD}}}

Used Parts :~

GTR 34 Intake Trust Airfilter kit lest then 1 week old $300 {{{SOLD}}}

GTR 34 Vspec 2 Radiator $300

GTR 34 Vspec 2 Seats, good condition come with rails $1800 each

Stock RB 26 Plenum + Stock fuel rail came out from vspec 2 BNR 34, they are in good condition $650.

Custom 20 inch wheels Work Meister Polish S1 2P 20x10.5 only one in Australia, the rims are in good condition and the tire still got heaps of tread more then 95% $6000. No stupid offer because im not in hurry to sale this wheels and took me long time to wait for this wheels to be make. Im selling it because i got another custom wheels coming and i might be selling my 19x10.5 Time Attack and a Ztuned nismo wheels 18x10.5 too before middle of the yr. They are brand new in perfect condition. Anyone who interested can pm me :)

Edited by Hoshima

Hi Hoshima

Sorry I am not after buying any of your parts but was hoping you maybe able to help me out.

I have the same HKS CAM's that you are selling fitted to my car. But I have not been able to find the setup information for them. If you could possibly check the information that came with your CAMs and let me know what HKS recomend? That would be fantastic and greatly appreciated.

Good luck with the sale.

Thanks

Kev

  • 2 weeks later...

Ztuned Nismo wheels sold pending. Thats how much i paid for the cams, you dont like it then dont buy it. Simple as that! As i already said all package price willing to negotiable but not stupid offer.

Edited by Hoshima
  • 3 weeks later...
  • 2 weeks later...

All this item brand new in the box, Updated:~

Hks Cams 272 IN/280 EX Stage 2 Rb26 10.2 lift AUD $900

HKS Step 2 Valve spring AUD$450

Tomei Solid Lifters AUD $500

Greddy Oil Pan Kit AUD $500

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...