Jump to content
SAU Community

Fs: R34 Gtt Full Carbon Fibre Bonnet

cjlancer
 Share

Recommended Posts

cjlancer Community Regular

cjlancer

Posted
Posted (edited)

Hi guys,

I have a R34 Gtt full carbon fibre OEM bonnet from Japan for sale. Suitable for respray as the clear coat has been stripped by some idiot at the car detailing place trying to wax the thing. The bonnet is full carbon fibre so extremely light and rare, its not the fibreglass with carbon fibre top. Reason for selling is that i brought a new bonnet so no longer required. Bonnet sits perfectly flush with the gaurds, strong latch attached. The only imperfections is a small chip towards the nose from a stone, and the bonnet does feels like a matt black due the detailing place therefore requires respray or recoating the clear coat might bring it back to normal.

$1100 when new from Japan.

Will sell for $370.

For inspection call 0433214198 after hours 6PM on working days.

post-25230-1204621897_thumb.jpg

post-25230-1204622358_thumb.jpg

post-25230-1204622497_thumb.jpg

post-25230-1204622604_thumb.jpg

Edited by cjlancer
Link to comment
https://www.sau.com.au/forums/topic/208968-fs-r34-gtt-full-carbon-fibre-bonnet/
Share on other sites
cjlancer Community Regular

cjlancer

Posted
  • Author
Posted (edited)

Im not 100% sure about the fitment on the R34 sedan, looks to me that it is the same, would anyone be able to confirm it? The whole bonnet was detailed so the whole clear coat is evenly stripped, not in patches. Also when i use a wet cloth to wipe the bonnet down it brings the carbon fibre back to original when wet.

Edited by cjlancer
cjlancer Community Regular

cjlancer

Posted
  • Author
Posted (edited)

Just to reply to some messages, this bonnet weighs in at 13Kg, shaves of heaps of kgs compared to the stock bonnet and even the fibreglass types, you can easily open your bonnet with the index finger when attached to car.

Edited by cjlancer
john-e boi Mentor

john-e boi

Posted
Posted

seen this bonnet in person. is in pretty good nick, even though will need respray or clear coat if wanting the carbon fibre look. but other than that, very good looking bonnet especially with the lip.

cjlancer Community Regular

cjlancer

Posted
  • Author
Posted (edited)

thanks john-e boi for the comment, that just reminds me that the front of the bonnet is slightly lipped so it does come out a few centimetres more than a stock bonnet. Slightly sharper and tougher, than stock bonnets by covering the grill more.

Edited by cjlancer
cjlancer Community Regular

cjlancer

Posted
  • Author
Posted

Throw me some offers guys, no reasonable offers refused. Willing to trade for parts too, interested in parts such as an electronic boost controller, turbo back exhaust, injectors, front mount intercooler that pipes back to stock.

KRYPTK Newbie

KRYPTK

Posted
Posted (edited)
Price drop $370.

Need it gone this week.

Hi,I am in Perth, and am v.keen for the bonnet. Will call you on your mobile tomorrow (Mon), although public holiday.

Please email more detialed photos to [email protected], or call me on 0422217041 any time during next week.

If I can repair it to a reasonable condidtion I WILL BUY IT AND PAY FREIGHT TO WA THIS WEEK. Would you be able to deal with that?

Edited by KRYPTK
KRYPTK Newbie

KRYPTK

Posted
Posted
The bonnet is quite a big size, to send it interstate your probably looking at another $200 bucks on top do you really wanna go ahead with that?

Tried to call you today, no luck getting thru - is your mobile # still good???

Yep, no probs with the freight, will try and call you tomorrow morning say 9am Perth time (will leave a message if you are unavailable).

Will get you to email me so more detailed photos, and go from there.

I will speak to my courier (Fast-trak) tomorrow when he comes in to work (have a RAWS Workshop in Perth) and see what the best approach is for packing etc.

If you get keen, pls forward photos to [email protected] - thanks, I can check it out when I get into work first thing tomorrow.

You can call me if you like, 08 9409 3423 BH or 0422217041 or email as above.

Thanks SHAUN

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...