Jump to content
SAU Community

Recommended Posts

Make: nissan

Model: skyline r32 gtr

Milage: 115000

Transmission: manual

Colour: gun metal grey

Location: qld

Complied? yes

RWC supplied? yes

Currently registered? yes

Price: 24000

Contact: 0424504288

**** i am having problems loading pics onto here so for full details of car and fgor pics go to my link at car sales http://www.carpoint.com.au/used-car/NISSAN....aspx?State=QLD

CAR HAS BEEN DROPPED BY 2K AS THESE REAR DIFF DEFIANTELY NEEDS REPLACING AND CAR WILL NEED A TUNE BEFORE ANY SERIOUS SERIOUS DRIVING. yOU WONT FIND SUCH A WORKED GTR IN SUCH GOOD CONDITION FOR CHEAPER!! The car makes an estimated 500awhp (no dyno) being controlled only by a remapped factory ecu so with a good ecu and tune could make a possible 600awhp.

-Custom Made twin plate clutch by direct clutch in brissy (70kms old and can suppport 1000hp. Very driveable)

-Forged rebuilt motor

-Garret 2540 roller bearing turbos

-huge aftermarket front mount intercooler

-N1 oil pump

-Aftermarket Injectors

-Rebuilt gearbox (straight cut gears)

-short shift kit gear box ( ridiculously short throw :( )

-front and rear sway bars

-front and rear strut braces

-rear vented fibre glas bonnet painted gun metal grey and has all same badges as gtr

-nismo 3.5" exhaust system

-cross drilled brakes front and rear

-twin aftermarket air filters

-mild cams

-forged pistons bored out .06

-nismo 320km dash

-Turbo timer

-HKS boost gauge

post-48532-1204786374_thumb.jpg

post-48532-1204786490_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/209226-r32-gtr-huge-power-500awhp/
Share on other sites

fully rebuilt motor and no aftermarket ECU and dynotune? :)

not to whore your thread, but things don't add up here champion- if the car hasn't been rolling road tuned, how was the factory ECU flash tuned to suit your engine???

well that's in clear contravention of the classified rules

THE DO'S AND DONT'S OF THE SAU CLASSIFIEDS!

6. No posting on behalf of others! - If your mates want to advertise their parts here on SAU, tell them to register - If you dont own it, dont post it for sale.

http://www.skylinesaustralia.com/forums/in...t&p=1281592

so let's have the thread deleted and the thread starter warned for not adhering to clear regulations

go for it. Just think if we have a terrorist attack in aus, people automatcially call on the members of defence. It aint his fault he has to be away from his family and friends for the next 8 months trying to protect australias wellbeing. So, by me making a legit mistake cos im not a forum nerd, then by all means go ahead and delete my thread im not hugely concerned. I just hope you die of cancer you flamin mongrel.

dude- you just add to your trouble by making personal attacks on me

and not to put too fine a point on it, but- troops stationed in the middle east (if that is the case) have absolutely sweet f.a to do with Australian national security.

why don't you stick two fingers down your throat and cough up the Howard government propaganda pamphlet, eh?

whatever

the forum has strict rules for classifieds. you broke them- someone used to observing rules and regulations for a living should have had no trouble following them

that's the end of it for me. it's up to the mods now.

dude- you just add to your trouble by making personal attacks on me

and not to put too fine a point on it, but- troops stationed in the middle east (if that is the case) have absolutely sweet f.a to do with Australian national security.

why don't you stick two fingers down your throat and cough up the Howard government propaganda pamphlet, eh?

:D i'd love to see that thing make 600hp @ wheels. lol. nice

Edited by sic200
  • 4 months later...
dude- you just add to your trouble by making personal attacks on me

and not to put too fine a point on it, but- troops stationed in the middle east (if that is the case) have absolutely sweet f.a to do with Australian national security.

why don't you stick two fingers down your throat and cough up the Howard government propaganda pamphlet, eh?

I think thats one of the funniest and politically correct posts i've seen on SAU ever loll .. I commend you !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...