Jump to content
SAU Community

Recommended Posts

Hey guys and girls got a few things lying around thought I might get rid of

Front Mount Intercooler with piping - $120

including all pipes, various rubber connectors and clamps. Front mount has usual markings from use still in decent condition...pipes could do with a clean...Put stock cooler back on my car SOLD

Stock J Pipe (from throttle body) - $10

Gutted Cat Converter - $10

Either HKS or GReddy copy (i think) BOV - $30

R32 GTR Inlet Manifold - $50

Has had black paint removed, ready for painting, no weird markings etc good condition

Stock R33 Series II Injectors - $75

Unknown condition, came spare with my old car

Stock R33 Series II ECU - $75

Also unknown condition, came spare

R33 GTR Copy Wing - $110

Had on my gtst but removed as put stock wing back one...brake light wire clip broken off for some reason, pushed wires into clip to use...all LEDS working when removed.

R33 GTST Stock Dump pipe - $15

came with stock turbo i bought

Located in Burpengary North Brissy...Pickup Only, can get more pics of items if required

Im also after a stock r33 catback exhaust if anyone has one

pm me for more info

Thanks

post-36458-1204791648_thumb.jpg post-36458-1204791657_thumb.jpg post-36458-1204791670_thumb.jpg post-36458-1204791683_thumb.jpg post-36458-1204791694_thumb.jpg post-36458-1204791705_thumb.jpg post-36458-1204791717_thumb.jpg post-36458-1204791735_thumb.jpg post-36458-1204791755_thumb.jpg

Edited by elad_33
Link to comment
https://www.sau.com.au/forums/topic/209237-r32-r33-stuff/
Share on other sites

Hey guys and girls got a few things lying around thought I might get rid of

Front Mount Intercooler with piping - $120

including all pipes, various rubber connectors and clamps. Front mount has usual markings from use still in decent condition...pipes could do with a clean...Put stock cooler back on my car

Stock J Pipe (from throttle body) - $10

Gutted Cat Converter - $10

Either HKS or GReddy copy (i think) BOV - $30

R32 GTR Inlet Manifold - $50

Has had black paint removed, ready for painting, no weird markings etc good condition

Stock R33 Series II Injectors - $75

Unknown condition, came spare with my old car

Stock R33 Series II ECU - $75

Also unknown condition, came spare

R33 GTR Copy Wing - $110

Had on my gtst but removed as put stock wing back one...brake light wire clip broken off for some reason, pushed wires into clip to use...all LEDS working when removed.

R33 GTST Stock Dump pipe - $15

came with stock turbo i bought

Located in Burpengary North Brissy...Pickup Only, can get more pics of items if required

Im also after a stock r33 catback exhaust if anyone has one

pm me for more info

Thanks

post-36458-1204791648_thumb.jpg post-36458-1204791657_thumb.jpg post-36458-1204791670_thumb.jpg post-36458-1204791683_thumb.jpg post-36458-1204791694_thumb.jpg post-36458-1204791705_thumb.jpg post-36458-1204791717_thumb.jpg post-36458-1204791735_thumb.jpg post-36458-1204791755_thumb.jpg

i will take intercooler kit will it fit r33 gtst where is Burpengary pm'ed

Edited by CHUCKIE821
Link to comment
https://www.sau.com.au/forums/topic/209237-r32-r33-stuff/#findComment-3700102
Share on other sites



  • Similar Content

  • Latest Posts

    • I was just driving into work and while on my drive, I went to accelerate and noticed the car would sputter/hesitate and I’d hear a few pops from the exhaust before it started going faster. Then I also noticed that when I push my clutch in, the car would die. This all started happening today. Any ideas?
    • That is a lovely Volvo, just saying. Yes I should have got an 260RS when they were cheap. I do regret now.
    • ^ lots of good points made above. The thing is, "aggressive" or "flush" fitment is relative depending on how much you have been influenced by social media. My starting point is always "look at the Nismo RWD specs". That is where you should start, then start measuring as GTSBoy as sort of mentioned, because every car will be slightly different. My 8.5"+35/9.5+38 will not be "flush" enough for you because you want more "pumped" look, which is why you measure. Tyre sizes and brand/models also make a difference. Some tyres are more chunky/square, some are more rounded. That means you could get away with more aggressive offsets without rubbing. But then it also depends on your ride height. Also depends on how much your car copped damage before being shipped from Japan. So it goes back to measuring your car yourself and determining what can work. Those Nismo specs are used bacause it's a safe spec for standard car (suspension. body) with chunky tyres. But then I put 265/35 wide tyres on R34 GT-R wheels, and currently run 285/30 tyres on 18x10 wheels.
    • Sounds pretty awesome. I recommend creating a new build thread and posting all your goodness in there.
×
×
  • Create New...