Jump to content
SAU Community

Recommended Posts

This has been mentioned a few times, but also make sure you get 2 mufflers to reduce cabin drone instead of 1 muff 1 hotdog or whatever.

Interested to see what you get as i'm in the same boat but don't wanna spend 1k+ for a jap one.

Edited by webng
Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3709707
Share on other sites

mmmmm. where to start

ok.

Just Jap sell a bellmouth 3inch stainless steel turbo-to-cat pipe for $220 delivered roughly. get that.

get a high flow cat converter

for the rear, I believe a R33 4door cat-back system will fit BUT it will need around 30cm welded on in length.

you do NOT need 2 mufflers.

A nice 3" straight through muffler (i use a Kakimoto gtr-racing muffler) is fine, best just to get an exhaust shop to fit the front section, measure the back section and then custom bend the pipe section from cat converter to muffler, welding the muffler on for you.

easy.

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3709719
Share on other sites

  • 2 weeks later...

i got a quote from everlast mufflers for a complete system, dump pipe, (bolted strait to the turbo) apparently theres some type that bolts onto the stock pipe :S. high flow cat. and the bak has 3 inch mandrell bent stainless steel with a cannon for $1600. he said he could do a 1200 one using cheaper metals and lower qaulity cat. and if i wanted i could mix and match... what do you guys think of this :S is it just me or is it fu*kn expensive?

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3734330
Share on other sites

well i have a split dump, highflow cat and 3.5" Greddy cat back system and i paid roughly the same price from memory......if your going for an aftermarket option then definatly worth spending the extra on a good quality metal pipes mate....its a good upgrade and highly recommend a good quality system...i have had it for a couple of years now and its given me no problems at all....apparently D&T and AAA exhausts are very good with prices and quality workmanship....AAA recently gave my mate a quote on using stainless steel from turbo back $1200

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3734353
Share on other sites

for the rear, I believe a R33 4door cat-back system will fit BUT it will need around 30cm welded on in length.

you do NOT need 2 mufflers.

I've got an R33 system (twin cannons) about to be fitted to my Stag. I'll take note of any changes/problems and give you guys an accurate account of how it fits.

BTW I'll be throwing on a muffler between the cat and cannons to quieten her down. :D

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3734556
Share on other sites

AAA recently gave my mate a quote on using stainless steel from turbo back $1200

Don't forget, there are different grades of stainless steel.

Some SS systems can still rust easily.

:D

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3734569
Share on other sites

i got a quote from everlast mufflers for a complete system, dump pipe, (bolted strait to the turbo) apparently theres some type that bolts onto the stock pipe :S. high flow cat. and the bak has 3 inch mandrell bent stainless steel with a cannon for $1600. he said he could do a 1200 one using cheaper metals and lower qaulity cat. and if i wanted i could mix and match... what do you guys think of this :S is it just me or is it fu*kn expensive?

Demand and supply.

Lots of people want exhaust work and are willing to pay what the shops ask.

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3735207
Share on other sites

go to exhuast technologies and speak to marky, he is good with prices and everyone knows his shop and product, highly rated and great quality, or D&T at salisbury and speak to gav, he is the person to talk to bout import exhuast systems.

Link to comment
https://www.sau.com.au/forums/topic/209732-stagea-exhaust/#findComment-3735935
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...