Jump to content
SAU Community

Nistune Powerfc Hks Fcon Haltech Ems Link Ecu Etc Real Time Road Tune And Dyno Tune Available In Sydney And Other State


Recommended Posts

I'm also looking at getting a tune checked/done

My r32 gtst

mods are

Rb20det

Fmic

Rs*r 3.75"

Coil packs

Pod filter

New clutch (heavy duty)

Already has a remapped ecu

How much am I roughly looking at?

Thanks.

  • 3 months later...

Hi Toshi,

I know I asked ages ago, but I'm starting to more seriously look at getting this done - am saving now.

My car is:

R33 GTST S1

stock turbo, stock injectors

Apexi AVCR

3" turbo-back exhaust

FMIC

I'd need the Z32 ECU with Nistune board supplied - so basically I'd turn up with my car as is, and get the ECU replaced and tuned by you - how much would that be in total so I know how much I need to have in cash?

Thanks mate!

  • 4 weeks later...

Toshi,

I want a Z32 Nistune ECU with a pre-loaded map for:

R33 Gts-t Manual

Full 3" turbo back

R34 SMIC

GT-R Fuel pump

Stock tubro, stock injectors.

Can you quote me for supply of this? ETA if I order?

Would I need to get a dyno tune to check AFR's etc after fitting?

  • 3 months later...

I am often asked how much power increase about E85 TUNE.

Power is around 30kw more than 98 octane fuel.

I recommend Bosch 1000cc injector because much better spray than hiflow injector.

  • 4 months later...

Hey toshi quick qoute mate

R33 s1.5

Hypergear atr43ss2 turbo

Fmic

750cc bosch injectors

255lph walbro fuel pump

Greddy style plennum with std throttle body

Z32 afm

3inch turbo back exhaust

Power fc

May have to get the plennum and injectors fitted

Edited by cav33r
  • Like 1

Hi cav33r

Price $550 road tune $600 dyno tune only $700 dyno tune and road tune both.

Hi soulfood187

If come weekday you can come any time.

  • 1 year later...



  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...