Jump to content
SAU Community

Garrett Gt2860r -5, Gt2860r -7, Gt3071r Turbos


Recommended Posts

  • Replies 88
  • Created
  • Last Reply

Top Posters In This Topic

I am tossing up between the gt3071r and a GCG highflow. My question is as i can not find it elsewhere what is needed to bolt the gt3071r to an rb25, is it just modified oil and water lines or the whole hog meaning custom dump pipe and intake side as well.

Yes you need new oil and water lines, dump pipe, other bits n pieces and plus mainfold if you wanna go for a high mount.

Hey sloutch i mite be interested in the 3071rs, whats the lastest date for a deposit.

cheers

Yes you need new oil and water lines, dump pipe, other bits n pieces and plus mainfold if you wanna go for a high mount.

Hey sloutch i mite be interested in the 3071rs, whats the lastest date for a deposit.

cheers

There won't be a deposit. A direct payment will be set up between the supplier and the buyer.

As i said before, i am not earning any form of money through this deal. I am merely helping out fellow SAU mates to get the best price for their turbos.

also more info on the 3071r, IW or external? what rear housing etc

We can supply you with the internal wastegate or external waste gate version. Which ever one you want. Same as the rear housing.

Unfortunately, i don't think it comes with the actuator. Need to double check with the supplier.

For information please go to Garrett website.

http://www.turbobygarrett.com/turbobygarre...bochargers.html

You've got a PM :)

Is there any way to avoid GST and taxes etc? I imagine if we get "caught", it'll be no cheaper than buying them from AUS? Unless I'm missing something (most likely :P )

Tommo you buying a pair for the bike mate?

lol

:D

sloutch- Im really interested in a 3071r internal wastegated, .82 a/r, ill let you know towards the closing date

;)

just to re-clarify that is $1500 for a 3071r EXTERNAL GATE, t3 4-BOLT REAR EXHAUST HOUSING in the 0.63 REAR.

only reason i am asking agian is, few people have misquoted this turbo for the internal gated, t2x flange,

and been re-quoted over $2000.

thanks,

just to re-clarify that is $1500 for a 3071r EXTERNAL GATE, t3 4-BOLT REAR EXHAUST HOUSING in the 0.63 REAR.

only reason i am asking agian is, few people have misquoted this turbo for the internal gated, t2x flange,

and been re-quoted over $2000.

thanks,

Yes it is $1,500 for T3 flange please read the post i replied. It was stated clearly.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...