Jump to content
SAU Community

Recommended Posts

also it's worth to mention that when i installed mine, i had to get a new plastic bit that goes on the bottom on the short shifter... the one i had supplied was a bit smaller and that would of made the gear stick feel loose.

the new part was purchased from local nissan dealer and was around $10 mark...

see attached pics for part number

post-24624-1184589103_thumb.jpg

post-24624-1184589118_thumb.jpg

^^^ I had the same problem as WhitePrincess, except my little cap fell off while driving! The result was a super loose gear stick and the cap somewhere in the gearbox, luckily it had not gone far and I was able to get it out. Ended up using the original one.

Also the allen key bolts supplied from *generic shonky ebay trader* were too short to attach the 'banana clips', after two hours of straining and cursing I had the bright idea of buying some longer ones, problem solved.

Good write up BTW

  • Like 1
also it's worth to mention that when i installed mine, i had to get a new plastic bit that goes on the bottom on the short shifter... the one i had supplied was a bit smaller and that would of made the gear stick feel loose.

the new part was purchased from local nissan dealer and was around $10 mark...

see attached pics for part number

so u fitted the supplied white bit into the nissan original part and it all fits together??

so u fitted the supplied white bit into the nissan original part and it all fits together??

nah mate, i bought a new one from nissan and through out the one that came with the kit. the pic is just for comparison between two (one on top of another one).

  • 2 weeks later...
so the banana bit... one side is flat and other side is not.. you know what im saying?

which side is goes up?

cheers

paul

depends on the bolts, mine were short so the flat bit was on the bottom. good luck

just fit one today!

actually its second time i been trying...

last time i was trying to use same bush as genuine one..

i ended up break this up...lol

i bought it from nissan and...

this time i heated the bush with hair dryer....

and pushed with little force and it got in..

anyway last time i just put the shifter in and secured by the both circlips...

and...it was very~~~ loose!!

this time i secured by the plates and... now its re~~~~ally shortened...

very firm and very quick!@!!

love it ~

thanks for the thread man!

  • 2 weeks later...
Hasy anybody cut their short shifter lever to make it nice and short?

Would it make the shifter crappy because of the way its designed?

im thinking about it, but havent done it... want to cut an inch of it...

im thinking about it, but havent done it... want to cut an inch of it...

Yes it looks a bit like a truck with it being so long...

I think its designed to have most of its weight near the bottom and a long shifter to give it the short throw feeling? so im not sure how it will be when i cut it...

Yes it looks a bit like a truck with it being so long...

I think its designed to have most of its weight near the bottom and a long shifter to give it the short throw feeling? so im not sure how it will be when i cut it...

it would be a bit harder to shift the gears as not as much throw will be there

  • 2 weeks later...

I HAD THAT EXACT SAME PROBLEM. THE LITTLE BUSH THAT WAS SUPPLYED FELL OF INTO MY GEARBOX AND HAD TO FISH IT OUT.

SWAP IT FOR ORIGINAL PART AND FOLLOW THESE INTRUCTIONS AND PHOTO'S AND YOU WILL HAVE NO PROBLEMS. :)

  • 1 month later...
also it's worth to mention that when i installed mine, i had to get a new plastic bit that goes on the bottom on the short shifter... the one i had supplied was a bit smaller and that would of made the gear stick feel loose.

the new part was purchased from local nissan dealer and was around $10 mark...

post-24624-1184589103_thumb.jpg

see attached pics for part number

That part should only be around $5. As you can see in the picture it is smaller than your old one. The correct part should be about the same size and I've been quoted $12 but wasn't too sure if it is the right one. Does anyone have the part number for the correct replacement?

That part should only be around $5. As you can see in the picture it is smaller than your old one. The correct part should be about the same size and I've been quoted $12 but wasn't too sure if it is the right one. Does anyone have the part number for the correct replacement?

dude, that's why the photo is there for... part number...

white(small) bit was purchased with the short shifter; yellowish(bigger) bit was my original which i broke and the plastic bag is from the new one that i bought at nissan and was sitting inside of the gearbox at the time when the it was all pictured :)

white, I just looked at my old receipt again. Nissan gave me the smaller white rubber bit. Their computer record has this part for the RB25dett gearbox. Part number is 32861-H7301. The first 5 numbers are the same, hence the above confusion. Thanks for the clarification :)

  • 6 months later...
  • 2 months later...

To get past the lower bush I simply grabbed a beer and rubbed it on the smooth concrete for a while then sanded it and it fit perfectly. I havent taken it for a drive yet but I noticed the throw is much shorted, but at the same time the actual gearstick is MUCH longer (higher) which sucks ass, anyone cut/modified theirs?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...