Jump to content
SAU Community

So I Want A Pet Moniter Lizard (any One Keep Lizards On Here?)

Nismo_Boy

By Nismo_Boy,
in Queensland

 Share

Recommended Posts

Nismo_Boy Grand Master

Nismo_Boy

Posted
Posted (edited)

I’ve been looking at getting a pet Lizard, but I can’t find if you’re allowed to keep Moniter Lizards in Queensland on the licensing web site, I know other states you can however,

Do any of you QLD people keep reptiles and know what the deal is, or can point me in the right direction of breeders an such.

Already checked out the EPA web site..

malaysia0513.JPG

Edited by Nismo_Boy
Nismo_Boy Grand Master

Nismo_Boy

Posted
  • Author
Posted (edited)
Illegal without a permit Josh.

Speak to parks and wildlife for more details.

Highly unlikely they will let you keep one tho.

Damnit! QLD sucks :no:

Off the top of you head, do you know what large Lizards we can keep in QLD? I don't want a girly small one

Edited by Nismo_Boy
shnaped_second Mentor

shnaped_second

Posted
Posted

Go to a pet shop and they can give you details of what permit you need for what reptiles. I know that Fishy business in noosa has the forms to acquire a reptile licence and from memory they were around $90-100

Nismo_Boy Grand Master

Nismo_Boy

Posted
  • Author
Posted (edited)
Go to a pet shop and they can give you details of what permit you need for what reptiles. I know that Fishy business in noosa has the forms to acquire a reptile licence and from memory they were around $90-100

Yeh but I wana know if you can keep a Moniter before I start chasing up license forms :no:

I saw a komodo dragon forsale on an American web site for $100k :)

Edited by Nismo_Boy
dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted

My mechanic has a few snakes... They are fun. I prob need to give him a call tomorrow so if I remember I'll ask him. But as above you do need a permit, just like you need for most native animals.

Nismo_Boy Grand Master

Nismo_Boy

Posted
  • Author
Posted
My mechanic has a few snakes... They are fun. I prob need to give him a call tomorrow so if I remember I'll ask him. But as above you do need a permit, just like you need for most native animals.

Thanks Dave,

Be helpful if you could ask <hugs>

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
    • soviet_merlin
      R32 GTST - 600KW+ RB28/CD009 Build

      By soviet_merlin · Posted

      What sold me on Trailer Park Boys is this scene: Great stuff, just stay clear from the new Netflix production.
×
×
  • Create New...