Jump to content
SAU Community

Recommended Posts

Hey guys,

Im looking at doing some track days soon, mainly circuit stuff. The car is a R34 N/A GT-four

I want the car to handle the best it can for track and street.

So far i have

-Cusco Coilvers 10 rear, 8 front

-Nismo front and rear sway bars

-Cusco Toe arms, caster arms, rear upper arms, strut brace, tension rod (all adjustable)

-Ikeya Formula Traction arms.

-18x10 wheels.

(all suspension arms will be going in this weekend)

What else would you guys recommend?

******************************

What brakes would you guys recommend also? looking to spend around 3k for fronts

The car will be getting a RB26 later this year with some power so i need to be able to stop good.

Thanks Luke

Edited by Luke_ENR34

Hi mate l think you should add a hicas lock bar and pineapples.

Me l would get the GTR brake pakage with slotted rotors braided

brake lines should fit your budget just fine if you shop around.

But a mate of mine has a set of big 356mm 8 spot brakes from

just jap which if you go this path they work pretty dam good.

Good luck with it

GTR callipers front and rear with good pads..

Slotted and drilled disks..

Braided brake lines only if their cheap through a GB of sorts or else its not worth it.

or.. for 2K the Just Jap package mentioned above.. you will also want to up grade the rears too.. (GTR's and disks should do)

That way you have a good brake pakage and least $1500 to spend wither on your 26 or loose weight off the car.

btw. If putting in a HICAS lock bar.. its worth going through with the effort and removing the HICAS system all together.. its about 40kg weight saving too..

Edited by GTS4WD

My car comes standard with no hicas as i found out :thumbsup: got attessa instead.

Ive been offered some R33 GTR brembo's front and rear full set for under $2500. Is it possible to get them slotted?

Thanks Luke

My car comes standard with no hicas as i found out :) got attessa instead.

Ive been offered some R33 GTR brembo's front and rear full set for under $2500. Is it possible to get them slotted?

Thanks Luke

HICAS is the 4 wheel steering system, doesn't your car have a little computer in the back boot behind those covers...?

And then a little bar near the back wheels.

HICAS is the 4 wheel steering system, doesn't your care have a little computer in the back boot behind those covers...?

And then a little bar near the back wheels.

Nope, no bar. Just a Attessa unit at the back right hand side of the car and a container in the boot to fill with attessa fluid.

I can get pics if u like :)

If you go GTR brembo, dont use DBA4000 rotors as they crack under track punishment. DBA5000s seem to be ok. If it were me i'd use G4 kits tho.

You havent mentioned tyres.... if you're really serious you'll get two sets of rims - one with R spec tyres for the track, the other with street tyres for, uh, the street...

If you dont want to run two sets of rims, go for something track friendly like Falken RT-615s or Federal 595RS (not 595 aka 595SS).

The R33 GTR brembo's come with the rotars also. so gonna be using them.

Thinking maybe later down the track i will get another set of rims and use those with some semi slicks.

Cheers for the info.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...