Jump to content
SAU Community

Paint My Car!

GI Joe

By GI Joe,
in South Australia

 Share

Recommended Posts

GI Joe Collaborator

GI Joe

Posted
Posted

Hey everyone im considering re-painting my car (long story, but i gotta repaint my front bumper and re-polish my car, which is gonna cost me a fortune anyway...), so i was wondering how much it would cost roughly to get a mettalic colour done and who to go through.

Also i was wondering, do i have to inform Transport SA about my new car colour?

coz when u r doing ur registration it says your car colour and stuff...

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/211329-paint-my-car/
Share on other sites
R31 drift pig Experienced

R31 drift pig

Posted
Posted

You need to be a bit more specific.

For starters, a metallic paint costs a lot more than a standard paint. Why not paint it the stock colour with maybe a metallic in it?

How far do you want to go? Just the visible outer shell? Door Jambs? Engine bay? Want to remove the motor to do so? And all the windows etc.

How straight is the body? A mate had his car painted that I thought was nigh on mint, and the painter removed 94 dents out of it.

Has it had previous crash work? There may be a few hidden surprises.....

To be honest, to get a full respray, without doing ANY work yourself, you're looking at around $5K - $8K, even more if you go candy/pearl paints....... My respray is only going to cost $1K, as I did all the prep work myself, and Im only painting the visible outer shell, because Im painting the car a very similar colour to standard.

MC Doyles, Tom Howard, All type crash, Eagle paint and panel etc are all reputable repairers, and do quality work. Some I think are a little overpriced,, but others dont.

All Type Crash are painting mine BTW.....

My advice would be to simply get your front bar repaired and colour matched, and have the whole car professionally buffed..... going to work out a lot cheaper and easier that way.

Finally, You cant just ring up TSA and say "I painted my car, it's not black", it will have to go to the TSA inspection centre and have the numbers checked that it isnt stolen etc....

Link to comment
https://www.sau.com.au/forums/topic/211329-paint-my-car/#findComment-3737050
Share on other sites
cruzin33 Veteran

cruzin33

Posted
Posted
You need to be a bit more specific.

For starters, a metallic paint costs a lot more than a standard paint. Why not paint it the stock colour with maybe a metallic in it?

How far do you want to go? Just the visible outer shell? Door Jambs? Engine bay? Want to remove the motor to do so? And all the windows etc.

How straight is the body? A mate had his car painted that I thought was nigh on mint, and the painter removed 94 dents out of it.

Has it had previous crash work? There may be a few hidden surprises.....

To be honest, to get a full respray, without doing ANY work yourself, you're looking at around $5K - $8K, even more if you go candy/pearl paints....... My respray is only going to cost $1K, as I did all the prep work myself, and Im only painting the visible outer shell, because Im painting the car a very similar colour to standard.

MC Doyles, Tom Howard, All type crash, Eagle paint and panel etc are all reputable repairers, and do quality work. Some I think are a little overpriced,, but others dont.

All Type Crash are painting mine BTW.....

My advice would be to simply get your front bar repaired and colour matched, and have the whole car professionally buffed..... going to work out a lot cheaper and easier that way.

Finally, You cant just ring up TSA and say "I painted my car, it's not black", it will have to go to the TSA inspection centre and have the numbers checked that it isnt stolen etc....

1K for painting the outside shell? seems to good to be true if its 2pac

also when changing colour of your car all you have to do is write on the rego renewal paper what the new colour is iv done it 4 times now lol

Link to comment
https://www.sau.com.au/forums/topic/211329-paint-my-car/#findComment-3737325
Share on other sites
R31 drift pig Experienced

R31 drift pig

Posted
Posted (edited)
1K for painting the outside shell? seems to good to be true if its 2pac

also when changing colour of your car all you have to do is write on the rego renewal paper what the new colour is iv done it 4 times now lol

Fair enough about the Colour change .... that was what I was told by TSA....

And yep, $1100 to have the 31 painted in 2pac. Ring All type yourself, prolly give the same price. Although I said it was a drift car and hayden said they generally look after the drifters LOL.

When the Corolla gets painted (in the factory toyota off white and all factory chrome.... yum!) it's only $900....31 is a bit more as they have to use the booth twice, once for the car and once for the kit.

That was paint/material supply,masking, painting, and buffing.

Edited by R31 drift pig
Link to comment
https://www.sau.com.au/forums/topic/211329-paint-my-car/#findComment-3737491
Share on other sites
cruzin33 Veteran

cruzin33

Posted
Posted
not trying to give them bad name but they done a dodgey job on my car after 2 trys becareful

Iv never hade work done by them as they are always busy but the old guy that owns the joint is a really top bloke last time i called i was on the phone for 30mins talking about putting sr20's in old rollers lol. What was the problem you hade with them?

Link to comment
https://www.sau.com.au/forums/topic/211329-paint-my-car/#findComment-3737564
Share on other sites
R31 drift pig Experienced

R31 drift pig

Posted
Posted
not trying to give them bad name but they done a dodgey job on my car after 2 trys becareful

He said there may be issues if the prep work isnt done properly, done the prepwork on a few cars that have been sprayed, havent had a problem so far.

Not really fussed anyways, only gonna be a 10 foot car; Looks great from 10 foot away LOL...

Link to comment
https://www.sau.com.au/forums/topic/211329-paint-my-car/#findComment-3737623
Share on other sites
ANGRYMANR33 Collaborator

ANGRYMANR33

Posted
Posted
Iv never hade work done by them as they are always busy but the old guy that owns the joint is a really top bloke last time i called i was on the phone for 30mins talking about putting sr20's in old rollers lol. What was the problem you hade with them?

without writing a story my car was keyed they fixed that no problems but when it came to colour matching i took it back twice and its still not right wasnt blended or buffed right left a tape off line of clear on roof which should have been buffed out also crap or something musthave came out of gun now i have lumps and crap in my paint that werent there when it went in not happy. they were good and didnt charge me to do again but he said he could do the job no problem so that no one would know .when we have a cruise i will show u .u will agree trust me.

Link to comment
https://www.sau.com.au/forums/topic/211329-paint-my-car/#findComment-3737638
Share on other sites
R31 drift pig Experienced

R31 drift pig

Posted
Posted

super cheap compressor and gun.... it's a very slow process LOL.

The compressor keeps running out of air. Gun is pretty killer though.

2 pac primer I got through a mate who's a panelbeater.... so cant tell you what the retail price is unfortunatley

Link to comment
https://www.sau.com.au/forums/topic/211329-paint-my-car/#findComment-3738336
Share on other sites
KISIN Veteran

KISIN

Posted
Posted
Fair enough about the Colour change .... that was what I was told by TSA....

And yep, $1100 to have the 31 painted in 2pac. Ring All type yourself, prolly give the same price. Although I said it was a drift car and hayden said they generally look after the drifters LOL.

When the Corolla gets painted (in the factory toyota off white and all factory chrome.... yum!) it's only $900....31 is a bit more as they have to use the booth twice, once for the car and once for the kit.

That was paint/material supply,masking, painting, and buffing.

that is sweet.

what you think looks better on 31, black or gunmetal (from r34gtr) ?

Link to comment
https://www.sau.com.au/forums/topic/211329-paint-my-car/#findComment-3739876
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • MBS206
      What should I do next to hold the head on

      By MBS206 · Posted

      When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

    • Rezz
      Chris' Toyota Mark ii JZX110

      By Rezz · Posted

      Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...