Jump to content
SAU Community

My M35 Stagea Will Not Start

danwatt

By danwatt,
in Four Door Family & Wagoneers

 Share

Recommended Posts

danwatt Collaborator

danwatt

Posted
Posted

Well today I went to the car and the car wont start. When you flick it to start you can hear the fuel pump pumping but no starter motor. Everything else seems to be working as per usual.

I checked the fuses on the drivers side kick panel and all was in order.

I checked the battery as that seemed fine, The radio / windows and everything work fine.

I disconnected the battery for 1h to see if that had anything to do with it.

Its got me stumped. I thought it could be the imobiliser but that seems to be ok too. I couldnt check the integrity of the immobiliser connections into the cars harness as I had no idea what I was looking at.

The only thing that seems different to usual is that when you move the shifter to reverse there is no revers sound on no revers lights. ( I noticed this when I tried to start it N)

Any idea why there would be no reverse lights or signal ?. Is there a fuse for the Lights that I cant find but surely this wouldnt stop the car from starting ??

Please help me as I am stranded.

Link to comment
https://www.sau.com.au/forums/topic/211724-my-m35-stagea-will-not-start/
Share on other sites
danwatt Collaborator

danwatt

Posted
  • Author
Posted
I do Ill will check that ? Thanks.

When the ignition is on and where the normal gear indication is there is nothing to say what gear it is in.

Does anyone with M35 have the sear selection when the ignition is on "ON" mine saays nothing.

bikenut Apprentice

bikenut

Posted
Posted

Hi Dan

Yes my M35 does have an indicator at the bottom of the speedo. It comes on when the ignition is on and show P, R, N etc. Have you had any work done on the car lately? New sound system etc. There is a thread on removing the centre console around the gear selector. It may show you a plug that has not been put together correctly.

Good luck

murray

andy65b Veteran

andy65b

Posted
Posted (edited)
Hi Dan

Yes my M35 does have an indicator at the bottom of the speedo. It comes on when the ignition is on and show P, R, N etc. Have you had any work done on the car lately? New sound system etc. There is a thread on removing the centre console around the gear selector. It may show you a plug that has not been put together correctly.

Good luck

murray

Sounds like the right idea. Sounds like the computer is not picking up the gear selector and will not let the car start unless it is in D.

Cheers

Andy

Edited by andy65b
danwatt Collaborator

danwatt

Posted
  • Author
Posted
Hi Dan

Yes my M35 does have an indicator at the bottom of the speedo. It comes on when the ignition is on and show P, R, N etc. Have you had any work done on the car lately? New sound system etc. There is a thread on removing the centre console around the gear selector. It may show you a plug that has not been put together correctly.

Good luck

murray

Thanks Murray, I have had the contre console out in the past and it is possible that there is something wrong there, I will check the connections tomorrow and try to determine if there is something not right.

It seems weard to me that there is an issue now when it had beed working fine for some time.

danwatt Collaborator

danwatt

Posted
  • Author
Posted
yeah, no gear signal getting through to ECU, like Murray said, check harnesses. Bad connection or something left off. Also check connections at Auto ECU, drivers kick panel on C34s.

On the drivers kick panel on the M35 there is the fuses as well as some control unit and alot of harness. Whats on the C34s ? Should I unplug the plus and just make sure everything is connected secure ?

I think it would be more like the centre console as I have had this out in the past.

I appreciate your assistance.

Lil_Bobby_260 Mentor

Lil_Bobby_260

Posted
Posted

like the others, im betting that it is the switch from our shifter not telling the ECU what gear the car is in, thus not letting it start, as a safety measure. In which case im pretty sure that that would not be fused due to it wold only send a really low amperage/low voltage signal.

chook Mentor

chook

Posted
Posted
On the drivers kick panel on the M35 there is the fuses as well as some control unit and alot of harness. Whats on the C34s ? Should I unplug the plus and just make sure everything is connected secure ?

I think it would be more like the centre console as I have had this out in the past.

I appreciate your assistance.

sounds same as C34, Auto ecu with a large harness, probably start unplugging and replugging all the plugs on centre console first though. just test as you go.

danwatt Collaborator

danwatt

Posted
  • Author
Posted
sounds same as C34, Auto ecu with a large harness, probably start unplugging and replugging all the plugs on centre console first though. just test as you go.

Well everything looks in order in the centre console, The only plugs that get disturbed when removing the console are the heated seats, 4WD syncro, hazards and shifter light. The shifter mechanism has only 1 main plug and this seems good.

The AUTO ecu on the other side kick panel has a hundreds of wires going to it and about 6 connectors. Seems like a lot of wires how would you know where to start.

chook Mentor

chook

Posted
Posted

Did you drive it after you had centre console out ? or something that has happened well after you did any mods ?

The Auto ECU should have fused power, check for power there, the 12V wire or wires should stand out from the rest.

danwatt Collaborator

danwatt

Posted
  • Author
Posted
Did you drive it after you had centre console out ? or something that has happened well after you did any mods ?

The Auto ECU should have fused power, check for power there, the 12V wire or wires should stand out from the rest.

I had been driving I for a while, But hopefull I may have found the problem as I have located another set of fuses and relays that I will have to check tonight. Im keeping my fingers cross as this problem is driving me insane.

danwatt Collaborator

danwatt

Posted
  • Author
Posted

Well I finally solved the problem , I was reading through some V35 documentation when it referenced another set of fuses and relays that are not that obvious on initial inspection. The fuse box is located on the passenger side firewall right in the corner. To see the Fuse box you need to remove the battery cover & surround as well as the black plastic window trim.

A simple fuse was all the problem see picture of fuse location.

post-40391-1206520565_thumb.jpg

danwatt Collaborator

danwatt

Posted
  • Author
Posted
good to hear, big relief Im sure, any idea what caused it though ?

Yea I know exactly what caused it, When they did the compliance and installed the rear child restraints. (Mine are in the top of rear or the cabin where the tailgate is mounted) and one of the bolts had damaged the rear tailgate harness. It wasnt until I went looking for a reverse light signal for my camera and the tuner that it failed and rendered the car useless.

Basicall if you short the reverse signal to earth you blow the fuse and the car wont start.

Im glad this didnt happen somewhere else away from home or else I would have been stranded with no clue and to make things worse its hard to get the towed with the body kit as there are no accessible tow points.

Now I am trying to work out how to route the video signal through the tailgate to finish the camera install.

Cheers for you help and support.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...