Jump to content
SAU Community

Recommended Posts

Hi People's

There's something wrong with my car. At the moment what happens is that when i put my foot down it gets up to about 5 psi fine and then just seems to stay there or even drop a little when it's on standard boost which is 7psi. When i put it on high boost which is 1 bar. It gets up to about 9 pound and is then very erratic and it's go up and then down a bit some times it rev's out and fine but feels very slow and other times up the top of the rev range it stutters a fair bit. when i turn the boost off it makes about 5-6 psi but the car just does not move. It revs out but just feels very very slow. When i give it rev's and drop the clutch (rear wheel drive) as soon as it hit's boost it just stutters). i looked at the power FC and everything looks fine and the injector duty cycle seems fine i can't see any leaks. and it ramps onto boost fine. All the interior guages seem fine. I have a metal cat but my car is just a street car could it be melted???

This Problem happened last night. I had it on high boost and was flooring it when at about 6000rpm it seemed to loose power and that problem has persisted to now.

The car's modified it has:

ACL Forged Pistons

ACL Piston Rings

ACL Big End Bearings

ACL Main Bearings

Ported and polished head

Stock polished crank and rods

Bored and honed Block

N1 Oil pump

N1 Water pump

Tomei Oil Gallery restrictor

Gates timing belt

New engine gaskets all round

New Thermostat

New NGK spark plugs

R34 GTR injectors

R34N1 turbos C106/GT25 A/R 0.60/0.64

New Rod bolts, welsh plugs

Fresh paint on rocker covers

3" Trust Front pipe and Power Extreme II Cat back Exhaust

3" Metal cat

Twin Apexi Pods

Apexi Power FC & Hand Controller

Greddy Profec B Spec II boost controller

Nismo fuel pump

i've changed spark plugs today checked for blow bye and everything seems fine. I really need some help.

Has any one had this problem before???

Edited by black sky
coil pack?

i doubt it's a coil pack because i got split fires not long ago. and some times it rev's out fine but it's just not making the right amount of boost and it feels really sluggish.

i just don't know what to do.

done a compression test yet ? I would start here just to put your mind at ease that its not the engine itself...

do you really think it could be the engine?? it's not blowing smoke, it gets onto boost fine, and the engine's been rebuilt not long ago. Oh god please tell me it's not the engine.

it could be a lot of things...but through the process of elimination you will narrow it down to certain areas..once you are 100% that the engine itself isnt the problem then you can attack other areas...Fuel or ignition..is where its most likely at....But first be sure that engine is perfect

Hey mate check all your hoses and look for leaks in your intercooler piping BOV etc. I found I had a similar problem with the boost (not spluttering though) currently there is a leak from the gasket going into the last of the throttle bodies (to be fixed next week), worth a try. I made a very simple device from here ( http://www.vfaq.com/mods/ICtester.html ) and blew compressed air into the engine and found it. cost $7 to make and and all you need to do is take off your air box, block one of the hoses from the AFM and place this in the other. (dont need the hosing as on the website just get 65mm PVC end stop fit in nicely)

hey mate, i have the same problem i have nail polished the coil packs, gapped spark plugs but no good i can only get 7 psi to rev cleanly on boost any more than 7 and it is like the rev limiter comes on at 6000 rpm.

i am onto it, will diagnose problem soon and let u know ... :D

hi, i just put a small vid on, this is what my car sounds like to 6000 rpm, quality of vid not too good

on the street

Congrats, your a tool :blink:

EDIT: Incriminating 'hooligan' link modified...

Thx

Edited by GeeTR

i don't think it's the intercooler piping as it comes on boost as normal and i don't think it's the splitfires because every now and then even on 14psi it revs out but just feels like crap.

but i am going to try that boost leak thing, it looks interesting.

but all indications make me think that it's a blocked CAT.

  • 3 weeks later...

Ok guys here's an update

I checked the cat all is good i checked the BOV and the same problem is occuring

i disconnected the Boost controller and it's just boosting up to .7 bar and it's fine but it was alway's like that only when i put it onto high boost does it stutter. any ideas???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...