Jump to content
SAU Community

Best Exhaust For A V35 Coupe

wabbo69
 Share

Recommended Posts

wabbo69 Enthusiast

wabbo69

Posted
Posted

Ok this is subjective but I want something that truly sounds awesome and demonstrates the real value of the v6 nissan motor.

Prolly dual

Prolly 3"

Prolly US import

The bset i have seen so far is either HKX or 3" dual maxflow.

Ok what do others recommend.

Ps: I do not want to change the front manifold and I want to use std mounts and rear defuser (stealth).

G

Link to comment
https://www.sau.com.au/forums/topic/211795-best-exhaust-for-a-v35-coupe/
Share on other sites
Guest

Guest

Posted
Posted
I've got a Borla (twin) from the US, CAT back, and it sounds absolutely fantastic! Only 2-1/4" though. Has made a huge difference, although I have changed my intake too.

I also have a Borla fitted to my Manual V35 and it is a sweet sound, you wont get anything better for fitting or value for money out of the box, Jash at C-Red usually has them in stock even extractors.

scathing Grand Master

scathing

Posted
Posted

Dual 3" is too big for a VQ35DE, unless you're building a race car.

Even a true dual 2.5" isn't ideal unless you're running FI. The peak power gain over a 2.5" that goes to single is barely noticable, but what is noticable is the drop in midrange.

The best exhaust I've experienced for a Z33/V35 is the Fujitsubo. Its quiet down low but gives a good note up top, the rear tank and tips look almost stock (which I believe allows you to retain the stock rear diffuser) and its great quality.

Out of curiosity, is there any reason why you don't want to change the "front manifold" (and are you referring to the headers/extractors or the intake plenum?)?

wabbo69 Enthusiast

wabbo69

Posted
  • Author
Posted

Thanks about the Zorst.

Now about the inlet side.... what should I change and why?

I read about plenum spacers and 350z inlets etc but not sure what the real benefits would be.

On the exhaust side all I want is better sound...may be simply replacing the rear muffler would help.

I do not want to lose any low or mid range efficiency.

Is there a decent rear muffler replacement?

G

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
×
×
  • Create New...