Jump to content
SAU Community

Recommended Posts

Hi guys,

Thailand was great: crazy country full of hookers, open sewers and crazy taxis! Oh.... and scooters, and tailors (pushy bastards), and street vendors selling squid on a stick (wasn't game to try it!).

I have an issue: my car was supposed to have the rust in the doors repaired, and a full respray while I was gone, but it turns out the rust had gone too far, and replacement doorskins will be needed: the repairer hasn't had a great deal of luck finding any, so my stag is still in pieces. I thought where better to find some replacements than on here?

So.... If anyone knows where I can get both left and right front door skins for my C34, don't be shy!

Anyone who feel like donating one of theirs? Or both?

Cheers guys, please let me know if you are aware of any available asap.

Many thanks,

Micah

Link to comment
https://www.sau.com.au/forums/topic/211857-hi-im-back-and-i-need-door-skins/
Share on other sites

Good luck finding them dude, but if I were you, I wouldn't be holding my breath...

Is this just the std rust under the mirrors?

You should be able to get the stuffed section cut out and a rolled-to-fit section flush welded in? Maybe you need to talk to some body repair people that specialise in hot rod and custom work? I know that someone repairing a 49 Desoto isn't going to be able to just buy a new door skin, and they manage to get body repairs done.

Yeah, I dont like your chances of someone saying, here have my doors, unless they want the moke look :yes: You can always give it a go yourself. Back when I was 16 I hand made all the entire lower sills, and sections in the doors of my lj torana.... Oh the memories. The metal is the cheap bit, but luckily mig welders are a heap cheaper these days. I think around the $500 mark. Just give it a go, you might surprise yourself :)

Here she is, obviously not quite completed at that stage, but I had just done the respray, home jobby too...

image016.jpg

hmm micah from my limited experience in the field (6 months of paid work exp at a paint and panel shop) im under the impression that they can just cut the section out, and tack weld a new section in. If need be, they can roll the new section to match the curves of the original. The other way is to weld a piece behind the rust hole, and then fill it. Unless it pretty fierce rust a whole door skin is not generally needed.

Oh and did you bring back any shirts?????????

crap crap crap. I know someone who has doors, but he's so unreliable with returning emails..... we'll see how this pans out. The rust is BAD: I left it a lot longer than I should have ;(.

Tried to get Stag shirts, but sadly to no avail

I'll go back again in a few months, if I can.... I'll do it for the team :P

As far as doing it myself..... The force is not strong in my family: mechanical inadequacy is the dominant gene: will get a few more repairers opinions, meanwhile hoping the guy with the doors gets back to me.

Thanks fellas!

Cool: that would be much appreciated! doors/doorskins....not worried either way as long as they are rust free - Respray is a foregone conclusion: when the rust is taken care of, I am removing the 'sports racks', and all badges, and colour coding the bump strips (I have a S1), so I will be getting a full respray regardless...

ill be having a family friend who owns the local favourite smash repairs joint and is a good hand at plastic welding, so i'll be having him remove the racks and flush fill the holes left in the rails with plastic, before having them high filled and painted black. Should be tidy!!!! Let me know how your guy goes, micah.

Im removing all badges except for Autech 260RS (ie any nissan and stagea badges).

What colour you going, micah?

What colour you going, micah?

I think I'll just go factory pearl white (silky snow) again: nobody ever suspects the white Volvo! That, and the fact thatI don't really want to have top remove the engine just to repaint the engine bay: when it comes out, it will be for a 50% pwer increase: aesthetics take a back-seat to performance...

nice... i like the pearl white that nissan and toyota like to spread around. Still looking forward to going for a strap in your car! I told you i los tmy licence til bloody august?

Hmm im hoping the black wont get noticed too much either... you putting a kit on yours at all?

nice... i like the pearl white that nissan and toyota like to spread around. Still looking forward to going for a strap in your car! I told you i los tmy licence til bloody august?

Hmm im hoping the black wont get noticed too much either... you putting a kit on yours at all?

Nah.... already has the Dayz kit: it will do. I priced the kit I wanted, and it came back at $3500 delivered: too expensive for something that doesn't make the car faster. Plus, I like the subtlety: it's all about keeping a low profile for me...

cos huge porsche brakes and GTR wheels are subtle lol... nah i get what you mean. I wouldnt spend those sorts of dollars on something that isnt going to help speed. My limit for a set of 18's is like 1750, no more than that.

All sorted: we managed to find a good passenger door, and we are going to repair the driver's door. Work is now underway to remove all badges and sports racks, and ZI'm fitting Ganador mirrors before a full respray. Hoping to have the old girl back in the next fortmight, but time will tell...

If only my damn Legnum wasn't held up: it sucks having no car!!

I've just noticed a small amount of rust under my passenger mirror, what's it costing you to get the door repaired, or is it just being lumped in with all the other work?

All one package: sorry! No idea what anything is costing yet, but I'm not looking forward to the day I have to pay! My mech organised it, and he'll get me a good deal...

crap: I was outbid on the ebay door!

Still in the same boat.... Any help would be appreciated! :laugh:

yeah thats me

I'll try to pick it up this weekend, depending on the seller

did you want it? I bidded for it in case a) someone here eventually needed it, or b) i respray it (ive got paint) and use myself as my rust needs attention soon, too

for a bid of $40 I figured it wasnt a bad "spare" to keep in the garage

yeah thats me

I'll try to pick it up this weekend, depending on the seller

did you want it? I bidded for it in case a) someone here eventually needed it, or b) i respray it (ive got paint) and use myself as my rust needs attention soon, too

for a bid of $40 I figured it wasnt a bad "spare" to keep in the garage

Crap: sorry Tangles: If I'd known it was you, I would have left it at $12.50 and bought it off you later!

I'm all good: rust repair/new door should be all done by Mon/Tue, but I'm going to leave it with them and get it back perfect in a couple of weeks.

It's killing me having no car, though... :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
×
×
  • Create New...