Jump to content
SAU Community

Recommended Posts

For Sale:

* 4x Enkie RPF1 17x9.5 +18 5 Stud - months old no scratches or anything look brand new. pretty rare never seen them with good offset in australia before. They fit with no spacers on the front with coilovers. Will fit under standard guards with some guard rolling and camber.

Pics on car are with 0 camber rear and 2.5 neg on the front with 30mm guards

These are very light, weigh in at just 7kg's each

Comes with FED 595's on the front only used for a week. And pretty used maxxis tyres on the back

$1800

* 4x Drift Teks 17x9.5 +18 5 Stud 2 of them have been powder coated white and 2 are still bronze. They have a few scratches.

$900

* Sard 550cc Injectors suit SR Been cleaned and new o rings at the start of the year

$350

Work wheels 18x9.5's +2 just a pair freshly painted black

$400

Blitz Nurspec Cat back exhaust

$250

Garrett gt28rs Disco Potato, used for a few months, no shaft play. 0.86 rear housing. with exhaust manifold and split dump pipe. Braided oil feed line, and stock water lines. Has aftermarket oil drain flange from GCG with the line too

$1000

BBS Meshies - 17x8 +35 5 stud offset pair only have driftable tyres on them

$130

Pics:

IMG_0839small.jpg

IMG_0838small.jpg

IMG_0836small.jpg

IMG_0837small.jpg

enkei_rpf1_silver.jpg

Image000-1.jpg

06042008.jpg

0604200w.jpg

Image007-2.jpg

Image006-1.jpg

05042008a.jpg

07042008.jpg

07042008-1.jpg

12042008-1.jpg

12042008.jpg

10042008-1.jpg

10042008.jpg

Location: South Brisbane

Contact: 0401151011 or pm

Edited by Waldo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...