Jump to content
SAU Community

Recommended Posts

RB20 -red top engine with silver top turbo...

just wondering if anyone has done this mod, and wondering if it is worthwhile... ????

because i can get one real cheap.

My turbo is in perfect nic, it just looses 4psi by the time it hits 6,000rpm (maybe this is a wastegate prb?)

i was told that stock RB20 silver top turbos will hold their boost until about 6,000rpm....true????

Dyno indicates my silver top hits peak boost at about 4500rpm and drops nearly 2psi to redline. Tiny stock turbos run out of efficency quickly, no amount of boost control electronic or otherwise is going to help it.

Ive never heard of this mod before, always figured both turbos were the same but the intake systems are different between the 2 motors. Im sure an RB head will correct me :D

Red17

I don't have boost drop until around 12.5psi (152rwkw).

Anything over that and it starts to boost drop.

I fitted the EBC and it will hold boost at 15psi BUT it is a little wavy and you can definately tell the EBC is working hard to hold the boost.

Fitting the EBC picked my power up from 155rwkw to 164rwkw.

But yer go the RB25 turbo and don't bother with the RB20 turbo.

"Put an exhaust on it!! My car has had 3" the whole time i've had and never had the boost drop off. The R32 turbo is much better to drive as it spools up a lot sooner."

yea thats what i was wonderin... i do have a 3" mandrel zaust, but i still loose heaps of boost up top

Sorry guys my car has always had a R32 turbo on it, non Skyline non ball bearing at first and then when i changed engines a ball bearing one which spools up alot sooner (about 2000rpm sooner!). But both engines started to lose power about 6500 they still reading full boost.

Carlos

nice one 32-gts, i was told bout the later model turbos but i dont know how to identify them, and i didnt know what years they were made... Yea i was surprised at actually how small the compressor wheel was when i took the intake piping off to have a look...!! didnt measure it but looks hell of a lot smaller than a standard t25 off an sr20..

11psi with zorst and cooler?

Nah... somethings not right my car and others... usually rise to about 9-10 psi with zorst/cooler.

11psi... hrmm...

My old coupe hit around 8.5-9 psi with the zorst.

does a bigger cooler help increase boost?

wouldn't imagine that it would.

and joel... full boost meanss the point where you turbo hits the desired psi.

If you set a belled value to say 20psi for instance, then when you hit 20psi is classed at full boost.

Make sense?

Sorry guys, i'm wrong, i watched the boost guage today and it does drop a couple psi above about 5000-5500rpm. Time to make up a dump now.

Nismoid, its a pretty good cooler kit, the guy who makes them designed it on his stock R33 which gained 40HP at the wheels with just the cooler, standard exhaust as well. The R31 coolers are just shit, even a standard R32 cooler will probably make a difference on a R31.

Carlos

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...