Jump to content
SAU Community

Dvd/cd/mp3 3.5" Screen Single Din Headunit


RANDY
 Share

Recommended Posts

Item: Regan RF-302B headunit

Age: 1.5 months

Condition: Like new

Price: 330ono

Location: Northern Beaches of Sydney. Can post.

Contact: via only this thread please. Mobile will be given to the buyer.

Comments:

I bought this headunit in February, and I have the receipts for warranty purposes. It *just* fit in my R33, but my (supposedly lost) new headunit arrived shortly afterwards. Now surplus to my needs, it is up for sale! If there is no interest here, it will go on eBay. (where they sell for a bit over my initial asking price)

I'm open to offers, and I realise that I will lose a bit of money because of my hasty/impatient buying... It's like brand new, and I don't think i've put any scratches on it. The screen is 3.5" widescreen, and I haven't even taken off the protective film! (it's a touch-screen and I wanted to protect it)

The box and pictures show all the details... but at a glance:

It plays DVD's, CD's, and VCD's. You can burn mp3's to a DVD and play them too!

It accepts a 3.5mm stereo jack input for ipods or whatever you like.

It is touchscreen, and there is an overlay that can control just about every function of the player.

It has video input, video output, reverse camera capabilities.... etc etc

It does BLUETOOTH... both for audio devices and for your phone. You can make and take calls through the unit, which auto-mutes the music at the same time.

The faceplate is removeable, and quite nice to look at. It's also motorised to 3 different viewing angles (vertical motion only)

It does radio, and has many presets available. Reception was as good as any other.

It has a TV tuner built in, which needs an antenna. I haven't tried it.

It has a USB input too, for external HDD's or a USB key.

There are cables coming out the back of the unit, and the usual plug-in set of cables for speakers, power, more RCA outputs etc. As you can see, I have left some plugs on the ends of the wires... there is plenty of cable left, so you can remove them if you use a different sort.

And here are the pics!

IMGP5125.jpg

IMGP5126.jpg

IMGP5129.jpg

IMGP5130.jpg

IMGP5131.jpg

IMGP5132.jpg

IMGP5133.jpg

IMGP5134.jpg

Edited by RANDY
Link to comment
Share on other sites

Yes... DIVX, XVID etc... I don't know about power output actually!

It has rear RCA and front RCA outputs. One pair is on the harness, the other pair is built into the rear (all pictured) and there is another yellow one for sub only. (on the harness with the front RCA outputs)

Oh I just found the output.. on the first picture above, the very right-hand side, bottom of the list... 4x50watt.

I think there is a youtube video of someone using it to show it off. Search for 3.5" dvd or something? =-]

Cheers!

Link to comment
Share on other sites

I bought it on eBay. There are plenty for sale there. Their selling price plus shipping works out to be around $400... I think I paid slightly under that. I think I paid $380ish all up, and the receipt is in the box for warranty purposes.

I'm open to offers (as stated in first post), cause i'm saving to go overseas in a couple of months.

Cheers!

Link to comment
Share on other sites

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Latest Posts

    • Could you have not cut off the OEM flange, weld on a larger flange for DBW?
    • Maybe of interest, a little while ago I spoke to one of the guys from Rajab Racing Developments and he hinted to me they could be developing a new cast exhaust manifold. Incidentally, they have already made one for the barra and it looks functional 
    • So Bathurst coming up so really need to get this new ECU in. I regret going to flex fuel and all the headaches associated with DBW with cruise etc....a miss the simplicity of Power Fc   I make enough power that I should have just gone back to 98 but...anyway Turns out with the std inlet I cant really go any bigger than 60mm DBW so wasnt able to play with that aspect of the update.  
    • We're bringing Pizzas back!! Pizza Runs, to be specific... We had a practice Pizza Run a while ago, and everyone has been screaming for a proper one... So you've asked, and now we're delivering! Since your tastebuds are tingling, feast your eyes on the event details: Date: Saturday 27th July 2024 Meet Location: Parking Lot - 1 Parkview Dr, Sydney Olympic Park Meet Time: Meet at 5.30pm for a 6.00pm departure Destination: Talotta's Pizzeria, 1-3 Bridges St, Kurnell Map: https://tinyurl.com/saunsw-talottas  We'll meet at the carpark on the corner of Parkview Drive and Australia Avenue in Sydney Olympic Park. When we leave the parking lot, we'll head down Australia Ave, and turn right onto Homebush Bay Drive at the large roundabout near DFO. As soon as we turn onto Homebush Bay Drive, we will be turning left onto the M4 to drive through the new M4/M8 tunnel! Everyone loves a bit of RB action through a tunnel.... We'll exit the tunnel at the Gardener's Road exit, and turn onto Princes Highway, where we'll follow it onto Rocky Point Road and then onto Taren Point Road. Once we reach Miranda, we'll turn left onto Captain Cook Dr, where we'll continue on straight until we reach Talotta's Pizzeria for some pizza goodness!!! There is a small carpark at the destination. Limited spaces are available, but there will be plenty of street parking in front of Talotta's There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. This is an official SAUNSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • The time has come once again, for another SAUNSW Sunday Session! You all know the drill by now, fam... This is the perfect event to catch up with the SAUNSW crew, hang out for a coffee and a bite to eat, and get in some photos and friendly banter! So without any ado, here are the details: Date: Sunday 14 July 2024 Meet Location: Penrith Krispy Kreme (at Penrith Panthers - Panthers Place, Mulgoa Rd, Penrith) Meet Time: 8:00am Map: https://tinyurl.com/saunsw-penrithkk  This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAUNSW event and will be run under a Motorsports Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
×
×
  • Create New...