Jump to content
SAU Community

Recommended Posts

Hi all,

Im basically a fairly big noob when it comes to cars, i've slowly been learning since i bought my first skyline so hopefully you can bare with me.

I'm worried about my r33 gts-t, because it seems to nearly stall itself, what I mean by that is that when im driving along and I peak at maybe 3-4k rpm and I put my foot on the clutch the rpm drops down below idle of whats around usually 750rpm when its warm, down to around 400-500rpm for less then a second then it bumps itself up to around 750rpm again without me touching the accelerator. It has been doing it for as long as I owned it, but I only decided to look into it after today, I put the clutch in to turn around a corner and the rpm must have dropped below 400, a red light on my dash flickered for a split second (no where near enough for me to see what it was) and my steering turned very stiff...

It's just worrying me and I was wondering if any of you know if this is normal or if there is a problem I should be looking into, if it turns out to be nothing I just want to be sure. Thanks. :)

Link to comment
https://www.sau.com.au/forums/topic/212780-r33-s1-gts-t-nearly-stalls-itself/
Share on other sites

i reckonn the red light was the battery light, when mine does that and the steering goes stiff the hicas light and battery light come on right ebfore the engine bumps the rpm back up again

mine does exactly the same as yours, but goes from like 50rpm to 1k. ive got it booked in for a diagnostic this week

Atmospheric? I think I do.. it's this http://img404.imageshack.us/img404/7532/imgp0001bg9.jpg

Wheres the airflow meter and how am I suppose to clean it? :)

delljit if the diagnostic helps you sort out the problem could you post or pm me what the problem was? Mine definitely doesn't drop as low as 50rpm.

Thanks for the replies.

D_C i think that might be an atmo bov

mine isnt atmo

ive cleaned afm

cleaned aac valve

changed fuel filter

changed timing belt

ecu reset

ecu has no error codes either

when it is in its little idle fluctuating mode, if i get out and pop the bonnet then unplug the thin vac line on the front of the inlet manifold the car will sort itself out after about 5-15 seconds then it will be fine for a while

my charcoal canister doesnt appear to be plugged in

I have a s2 and mine was doing this for a while after I installed my dual port BOV

after reading around, i just tensioned the spring more so it sneezes higher up the scale and made sure my vac line was really tightly secured at both ends and problem solved

it would seem the gts-t has a problem with being vented to atmosphere at the lower range so this would probably explain why your having problems with ur atmospheric BOV, and why people who go back to the stockers plumb back system don't encounter the problem any more

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh dear. The panel beating needs to be done before the filler work. Do you have a photo of the dent before you started? Hard enough to not flex and only hit the high spots?  What do you mean it was just temporary? 
    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...