Jump to content
SAU Community

Please Help! - R33 Front Bar

alexandra

By alexandra,
in Victoria

 Share

Recommended Posts

alexandra Rookie

alexandra

Posted
Posted

OK so sadly one of the work vans at my work backed into the front of my car,

i week or so later they backed into the back!

:woot:

so then my work said they will now pay for the back and not the front? (ARS*HOLES)

so i went and got a quote and my work said the quote was to high... so they reffered me to a place they wanted me to get a quote from

so i did...

i asked them if they will fix the front to and i will pay the extra (550 for the front to be fixed)

anyway i go to pick it up today only to notice that the front bar was a completely different one!!!! OMG

it looks effing terrable!!

I ask the man what was up with it and he said they cant get the one that was orriginally on it anymore and they had to put that one on instead.... i asked why i wasnt called about this??? (i was holding back my tears)

i told them i wasnt happy with it and that it needed to be fixed! or put the old one back on and i will go somwere else! he said the old one was thrown out!

AHHHHHHHH :P

he said i have to pay for the one that is on there and that there was nothing i could do about it!!! im like NO this isnt on this is not fixed!!

he said if i find the M-SPEC the one he cant find he would paint it up and put it on for me...

so i would end up haveing to pay for the 2 front bars! he said thats the only way... THIS IS BULLSH*T

why should i have to pay for a bar i dont want???? WHYYY?????

so anyway i am desperatly triing to hunt down the same front bar... M-Spec

PLEASE PLEASE PLEASE help me

im carless and up 550 for nothen if i dont find one =(

theres a pic of my car and the original front bar on it .

Oh yeah and im pretty sure he has put a silvia front bar on it.. is that possible?

23h16de.jpg

post-49655-1207203139_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/213292-please-help-r33-front-bar/
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

get some pics of the front bar you want

and speak to slidewize imports (their a trader on the forums here)

zac could find it on yahoo japan auctions no problems

but you would have to wait a few weeks for shipping (unless you want to pay expensive EMS)

lastly try ebay or see if UAS.com.au in sydney have any suitable front bars

htial Grand Master

htial

Posted
Posted

Name and SHAME!!!...

They should have called you to let you know they couldn't find the bar...

The bar you have in the photo looks like the same one I have... ...Maybe try Oakleigh Mechanical Repairs... ...They have heaps of strange parts for 33s... ...95684887...

Timeb0mb Enthusiast

Timeb0mb

Posted
Posted

:D

thats Effed, they should have called you about not being able to find you you old bar, and they shouldnt have "thrown away" your old one, thats YOUR property weather its screwed or not, some would call that theft

i have a M-spec but im using it. wouldnt have thought they would be hard to find... :P

alexandra Rookie

alexandra

Posted
  • Author
Posted
theres a few places u can try in dandenong, on bridge road.

but what they did to u is such a load of crap....who were they anyway?...

its AMI in Keilor

i had to go to them because my work wouldnt pay for any other quote i got unless i went to them!

i didnt like the look of the place.. and i guess my instincts were right!

schiavello... never work for them.

alexandra Rookie

alexandra

Posted
  • Author
Posted
hey man you will NEVER find this front bar!!! because the bar your refering to is for an R34 GTR...

try asking for a TYPE M front bar and you'll find that most jap wreckers will have afew of them

good luck

oww mybad :)

thanks for that!!

some_cs_student Veteran

some_cs_student

Posted
Posted

So you haven't paid for the current front bar they fitted?

Maybe the ACCC could help you with fixing there customer service, you got something you didn't ask for so you shouldn't have to pay for it! Although its always hard to get the money back....

Good luck finding the front bar, I've had similar problems with repairers too, they broke the headlight clips and refused to replace them claiming it was "previous accident damage".

Oh, and name and shame is not allowed on SAU.

Paradizzle Grand Master

Paradizzle

Posted
Posted

Don't take this shit. Both your work and panel beater can't just do what they want.

Your work damaged the front and rear of your car. They pay for the front and rear of your car. They don't decide they will just pay for the back and not the front.

A panel beater cant just choose a front bar that's not even what you wanted and then expect you to pay for it (without letting you know they cant get the original front bar).

Write up a nice legal letter and kindly explain you will rim them in the asshole if they don't fix this bullshit of a job. There are options such as Victorian civil and administrative tribunal (VCAT) that you can deal with such disputes which doesn't cost and arm and a leg. Get things in writing also, write a letter to your work outlining what happened (they hit front AND rear of your car). Hopefully they will acknowledge that it happened and then you can use that against them to recoup all costs.

I hate hearing terrible work practices such as this. The other thing that i really hate also are scum (your work) who damage things then refuse to pay/dont pay for the whole lot.

Makes me angry reading your situation as you have done nothing wrong, yet you have been screwed over massively. You cant let them walk over you, its bad enough they hit your pride and joy TWICE, but to not pay all costs and then have an asshole of a panel beater is just rediculous.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Hendasto
      Lets play a game - What is causing my oil consumption?

      By Hendasto · Posted

      Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • Hendasto
      Are RBs worth building reliability wise

      By Hendasto · Posted

      At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • MBS206
      New kid on the block

      By MBS206 · Posted

      https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
×
×
  • Create New...