Jump to content
SAU Community

Best & Reliable Mechanics For Engine Rebuild In Nsw

10MinuteCar

By 10MinuteCar,
in New South Wales

 Share

Recommended Posts

10MinuteCar Collaborator

10MinuteCar

Posted
Posted

hi i need to know the best place in Sydney to take my car in for engine rebuild as i may need to change piston rings. i need mechanics who won't overcharge me and do the job like they have done before efficiently and perfectly.

Pezhead Grand Master

Pezhead

Posted
Posted

There are plenty of good shops around, but why do you think you only need to change the rings? If your motor is tired then you will at least need to do the pistons and rings together. They will need to hone the bores if you are lucky (not too worn or scored) or bore them out if they need to be cleaned more than a hone.

While you are doing all this you might as well change the oil pump, have the rods cleaned and inspected (maybe shot peened), etc. Since the head has to come off to do this, you might as well do it too. Do a valve grind and possibly replace the valve guides or at least the seals.

The objective of a rebuild is generally to return/enhance the core strength and tolerances of a motor and that takes a lot more than just replacing a few items.

I doubt you'd find a reputable shop that'd only do the rings.

(my 2 cents)

10MinuteCar Collaborator

10MinuteCar

Posted
  • Author
Posted

thanks alot with the help! yeah im thinking doing exactly wat u said "pezhead" but yer i need a workshop who knows wat they're doing like wat other things to look for potential damage. How much do you think it'll cost to do all what you said?

10MinuteCar Collaborator

10MinuteCar

Posted
  • Author
Posted

BTW nobody recommends shops such as belgarage, CRD and etc? are the just good in performance mods and not rebuilding an engine? who are the reputable engine builders? i'd appreciate it very much.

TommO Grand Master

TommO

Posted
Posted
BTW nobody recommends shops such as belgarage, CRD and etc? are the just good in performance mods and not rebuilding an engine? who are the reputable engine builders? i'd appreciate it very much.

They're good but you pay a lot for their experience.

TommO Grand Master

TommO

Posted
Posted (edited)

A mate just got his engine (SR20) built from http://www.stmarysengines.com.au/, they did the head work / machining / fitting etc, and my mate providing the parts (cams / pistons / rods / timing gear)... They seem to be very good so far, and we'd heard nothing but good things.

Other than that, almost EVERY workshop send your block/heads to specalists for machining etc..

Edited by TommO
JDSracing Community Regular

JDSracing

Posted
Posted
yep but they also send the heads away for machining and such. i guess there are just no workshops who acutally do the head work themselves.

Leon's Engineering in Artarmon,

Does full engine building and head work themselves (well, when I last used them a bit over 4 years ago now).

10MinuteCar Collaborator

10MinuteCar

Posted
  • Author
Posted

yep i called up proengines, they seem to be very promising and really knows their stuff. but the price is still around the 6k mark just to freshen up the engine back to normal leaving it as stock internals. im guessing its the parts which bring the price up like this.

FATAZZ Grand Master

FATAZZ

Posted
Posted
Has anyone heard of Insight Motorsport (i think that's what it's called). A workshop recommended them to me for a tune.

Any thoughts?

They put a GT35 or 40R turbo on this dude's(friend of friend) 2.7L hillux.

tuned with all supporting mods,i went and spoke to the bloke at Insight.He seems nice.

Their just off Holbeche. not much but hope it helps.

From memory they looked to have a few evo rally cars they were working on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...