Jump to content
SAU Community

Recommended Posts

Zane put one onto his stock GTS series 2. He is very happy with the bar & plate 600x300x 60mm one. On his stock car his dyno went from 145 kw cold & 123kw hot to a consistant 165kw hot and cold. If I was to own a GTS again it would be my first mod. FYI I think it was about $600 to get installed.

Link to comment
https://www.sau.com.au/forums/topic/2138-hybrid-intercooler/#findComment-39580
Share on other sites

Its the guy I used on my original GTS-T. His business name in Mobile Turbo Service, Dennis is the guy, 0415100345 (Tell him the white skyline guys told you to call). He is mobile but lives down Cabramatta way. You drop the car off on Friday and pick it up on Monday. Zane and I have both had it done and have had no issues. You do need to supply your own blow off valve if you dont want to use the standard one. Both times we just had the steel piping painted, he may do stainless polished but you will have to ask.

Link to comment
https://www.sau.com.au/forums/topic/2138-hybrid-intercooler/#findComment-39593
Share on other sites

Cheers guys,

The core is 600 x 300 x 76, and with full piping kit the cost is just under $1,600.

OzGTR97, does the $600 you said include pipework or was that just an install cost? I would have thought that if you provide the piping kit it shouldn't take more than a day to install??? (ie around the $300 - $400 mark).....

Brett

Link to comment
https://www.sau.com.au/forums/topic/2138-hybrid-intercooler/#findComment-39634
Share on other sites

My Hybrid Intercooler (bar and plate) is 600x300x76 and cost me $850 (new). The finish is excellent and so far the cooling capabilities are impressive.

Dennis from Oz's post above did the install for $650. This included all pipes, silicon connecting hoses, clamps, painting and fitting. Dropped the car in on friday night and picked it up on sunday arvo.

The setup included removing the factory crossover inlet piping and custom making a new pipe that bends 180 degrees from the plenum and drops to the front driver's corner. This cuts out a few feet of piping and reduces potential lag. I also had Dennis refit the factory BOV onto this pipe so the whole setup passes EPA inspection and keeps most ignorant cops happy. The piping is even sprayed grey so it matches the colour of the plenum.

With this FMIC setup, a full 3" exhaust and pod filter, the car makes a rock steady 163rwkw any day of the year. The test will come when I raise the boost and start pumping hotter air through the core. I don't expect any problems as so far the FMIC stays icy cold.

Z.

Link to comment
https://www.sau.com.au/forums/topic/2138-hybrid-intercooler/#findComment-39809
Share on other sites

If you supply all the parts then I would hope no-one would charge more than $300 to install.

Bear in mind that the front bar will need to be trimmed back to allow the cooler to fit which can be a tricky job for a tight fit.

If your good with tools and have the time I see no reason why you couldn't do it yourself. Remember, $300 in your pocket is $300 more to spend on going faster.:(

Z.

Link to comment
https://www.sau.com.au/forums/topic/2138-hybrid-intercooler/#findComment-39936
Share on other sites

Yeah fit it yourself all that's needed is that you have to bend a few metal brackets in a vice to secure the cooler to the car, mine has a GTR bodykit so I didn't have to cut or even remove the front bar to install. I bought stainless mandrel bends cut them to size, taped them together and gave them to an engineering shop to be welded up, buy some rubber or silicone hose and clamps and that's it.

Link to comment
https://www.sau.com.au/forums/topic/2138-hybrid-intercooler/#findComment-40289
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...