Jump to content
SAU Community

Recommended Posts

Looking at doing a single turbo conversion.. what i want to know is what is the biggest i can go is with standard internals..

on around 10 to 14 psi..

I have power FC, Split fire coil packs,exhaust, upgraded fuel pump and presaure reg,

If someone could tell me what size i could go to and what other suporting mods i would require that would be great. aprat from the obvious manifold wastegate etc.

Thanks guys.

:-)

Link to comment
https://www.sau.com.au/forums/topic/214389-single-turbo-conversion-question/
Share on other sites

i just finished my single turbo conversion on my R32

the only internal work i have atm is HKS step 1 cam shafts 264 intake, 264 exhaust and HKS adjustable cam gears

i first went out and bought a T04z but sold it for a Gt3540 with .78 divided exhaust housing

i bought the small exhaust housing because i dont wanna rev the engine hard with standard bottom end and standard oil system

all im waiting on now is a clutch and ill be ready for a tune

my list of supporting mods

TiAL 44mm gate

custom twinscroll steam pipe manifold

hks cams

hks cam gears

sard 800cc injectors

sard fuel reg

apexi power fc D jetro

blitz boost controler

full exhaust

115mm intercooler

fuel pump

its realli only a basic build just bought every thing which i needed to support the turbo setup

Thanks mate your a legend.. will help heaps when i start ordering stuff..

Ill rebuild the engine later on down the track. he he.. maybe after it blows. Jokes. :-)

yeah im in the same boat as u

i dont wanna rebuild my motor unless i have to

so im gonna enjoy it for as long as i can and when she lets go and doesnt wanna play any more ill go threw the rebuild

I have a single turbo gtr, and have tuned quite a few. IMO i think they are overrated, for less $$$, you can keep twins, get better response, and make far more power than the standard engine can handle. Dirtgarage is making close to 500awkw, with lowmount turbos. They stock rb26 internals are really only good for a long term 320rwkw, any more and it will go, just give it time.

It took me a long while to realize, theres a perception that BST or MST make more power / better response then low mount twins.

People must just like the idea, of replacing two with one... or like the look of a stonking great high mount :P

Diff ways to skin a cat, each to their own i guess.

i have a single on mine and if u plan on workin on the engine at all i would never ever ever put a set of twins on a rb26, they are a pain and a single turbo frees up sooo much room in the bay and simplifies things. My mate runs a gt3040r on a 3L 7m and makes 440hp at wheels on 19psi, and it is absolutely great for response, if i ever downgrade i would choose one of those for track work.

external wastagates are also nice as an added bonus :P

Yeh but you can get 440hp atw's from a lowmount turbo upgrade with better response :D

yer but if u plan on ever workin on it i bet ya turbo removal takes longer than 30 min :) or getting those dump pipes off are great fun on stock low mounts. I know alot of u guys dont touch your cars and leave it to mechanics but if u do then u will understand if u seen a single turbo setup compared to twins.

why would twin low mounts have better response? alot of these supposed good response lowmounts i see arnt making decent boost till over 4000rpm anyway which isnt so crash hot im sure a gt3040 would be as good and if not better considering it makes full boost under 3000rpm on my mates 3L.

I think alot of you guys think single turbo = t88 or gt42 or t04z even and there is such thing as small single turbos that still make 500hp at wheels and come on boost early in the rpm.

twins are good from a legal looking engine bay point of view, but i personally will never use twins again unless i want redicilous power and go twin high mount 3037s or something.

this is just my opinion and everyone has there own so make what you will of it :)

Edited by unique1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...