Jump to content
SAU Community

Recommended Posts

hey guys, looking at selling my nissan 200sx, with an RB26.

its had over $100,000 spent on it and i have receipts to prove it all, car was built for go and show.

i'll list some basic mods and put in mroe specific ones tomorrow, but this is it-

rb26 head, rb30 bottom end (both been built)

R33 GTR motor + R33 garbox

HKS T51R

customer stialess steel manifold

CUSTOM 3.5" stainless steel exhaust + FMIC kit

TURBOSMART 50mm PROGATE

HYPERTUNE plenum + 100MM throttle body

NISMO twin plate clutch

custom 3" one peice tailshaft

880CC injectors

SARD fuel rail and fuel pressure reg

WALBRO lift pump, CUSTOM surge tank, 2 x BOSCH 044 external pumps, 2 x EARLS billet fuel filters + braided fuel lines ass to nose

HALTECH E11v2

HALTECH GENIII external coils

BLITZ SBC ID3 electronic boost controller

B&M oil cooler kit

MISHIMOTO 60mm radiator + 2 xx 12" MISHIMOTO slimline thermo fans

GREDDY 260 degree IN/EX cams

GREDDY cam gears

GREDDY 1.8mm head gasket

GREDDY pulley kit

ROSS harmonic crank pulley

GATES radiator hose kit

GREDDY suspension

SABER gauges

ECC custom modified sump

URAS type S kit

URAS NS01 wheels

custom smoked tail lights

NEW ANGEL EYE HEAD LIGHTS BEING PUT IN THIS WEEK AS WELL!!!!

an amzing buy for something completely different.

Price is $70,000 but is negotiable and i would also consider swaps of interest...

post-37259-1208144340_thumb.jpg

post-37259-1208144382_thumb.jpg

post-37259-1208144525_thumb.jpg

post-37259-1208144558_thumb.jpg

post-37259-1208144569_thumb.jpg

post-37259-1208144679_thumb.jpg

post-37259-1208144840_thumb.jpg

post-37259-1208144994_thumb.jpg

post-37259-1208145119_thumb.jpg

post-37259-1208145641_thumb.jpg

post-37259-1208145770_thumb.jpg

post-37259-1208146016_thumb.jpg

post-37259-1208146145_thumb.jpg

post-37259-1208146280_thumb.jpg

Edited by rb26 200sx
Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/
Share on other sites

power figure still coming as its getting tuned as we speak... pulled 500hp with the original rb26 bottom end, off the first run, as in... untuned!!!, heard a bottom end noise wen tuning it after that first run, so i bought the rb30 bottom end. :D

actually surprisingly i have only ever been pulled over once and only got fined that one time... cops usually, pull me over to have a look, they mostly like it, it's the kind of car thats too nice to thrash, people respect it cuz its different. ;)

By the way, my fine was for the fibre glass bonnet which is actually complianced my QLD transport, the cop didnt know that you can buy legal fibre glass bonnets from blitz, so he gave me a defect, it all got cleared when blitz called him and did their thing :D

Edited by rb26 200sx
Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/#findComment-3794211
Share on other sites

I'll be in QLD next week, can I arrange to come see it in action?

hey guys, looking at selling my nissan 200sx, with an RB26.

its had over $100,000 spent on it and i have receipts to prove it all, car was built for go and show.

i'll list some basic mods and put in mroe specific ones tomorrow, but this is it-

rb26 head, rb30 bottom end (both been built)

R33 GTR motor + R33 garbox

HKS T51R

customer stialess steel manifold

CUSTOM 3.5" stainless steel exhaust + FMIC kit

TURBOSMART 50mm PROGATE

HYPERTUNE plenum + 100MM throttle body

NISMO twin plate clutch

custom 3" one peice tailshaft

880CC injectors

SARD fuel rail and fuel pressure reg

WALBRO lift pump, CUSTOM surge tank, 2 x BOSCH 044 external pumps, 2 x EARLS billet fuel filters + braided fuel lines ass to nose

HALTECH E11v2

HALTECH GENIII external coils

BLITZ SBC ID3 electronic boost controller

B&M oil cooler kit

MISHIMOTO 60mm radiator + 2 xx 12" MISHIMOTO slimline thermo fans

GREDDY 260 degree IN/EX cams

GREDDY cam gears

GREDDY 1.8mm head gasket

GREDDY pulley kit

ROSS harmonic crank pulley

GATES radiator hose kit

GREDDY suspension

SABER gauges

ECC custom modified sump

URAS type S kit

URAS NS01 wheels

custom smoked tail lights

NEW ANGEL EYE HEAD LIGHTS BEING PUT IN THIS WEEK AS WELL!!!!

an amzing buy for something completely different.

Price is $70,000 but is negotiable and i would also consider swaps of interest...

post-37259-1208144340_thumb.jpg

post-37259-1208144382_thumb.jpg

post-37259-1208144525_thumb.jpg

post-37259-1208144558_thumb.jpg

post-37259-1208144569_thumb.jpg

post-37259-1208144679_thumb.jpg

post-37259-1208144840_thumb.jpg

post-37259-1208144994_thumb.jpg

post-37259-1208145119_thumb.jpg

post-37259-1208145641_thumb.jpg

post-37259-1208145770_thumb.jpg

post-37259-1208146016_thumb.jpg

post-37259-1208146145_thumb.jpg

post-37259-1208146280_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/#findComment-3795480
Share on other sites

Wow Dmat, awesome, truly awesome, when you told me a few months back u were getting a rb26 i was looking forward to seeing it.

Sad to see your selling it.

Bryn

Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/#findComment-3798187
Share on other sites

Wow Dmat, awesome, truly awesome, when you told me a few months back u were getting a rb26 i was looking forward to seeing it.

Sad to see your selling it.

Bryn

yeah dude, it'll be tough, but time to move onto bigger and better things :D

Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/#findComment-3802099
Share on other sites

  • 1 year later...

hi my names sebastian i have an s15 i am also looking at putting an rb26 in my silvia and i was wondering if u could tell how hard it was?? and wheather you had photos of when it was getting done?? if ud care to share any pics or info my email is [email protected]

thanx

Link to comment
https://www.sau.com.au/forums/topic/214804-rb26-s15/#findComment-4686104
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...