Jump to content
SAU Community

Hi Flow Race/street Performance Cat 3"

bazr33
 Share

Recommended Posts

bazr33 Mentor

bazr33

Posted
Posted

STAINLESS STEEL HIGH PERFORMANCE RACE/STREET

CATALYTIC CONVERTER 3" HI-FLOW NEW

New Top Quality High Flow Ceramic Universal Catalytic Converter.

This has 3"ends 11" long and 4" round Universal OBD II compliant.

Don't let your stock converter slow you down. If your looking to open up your exhaust flow and get some free Horsepower, this Cat is for you.

This converter is one of the BEST in the Industry, it is made from T-409 Stainless Steel - Won't Rust, can be polished, can be slip fitted, or welded, are compact and light weight, and out flow most other aftermarket converters.

This high flow converter features a ceramic brick with 300 holes per square inch.

Offering better Performance and Flow, in some cases more than 50%, than comparable converters, and sometimes costing hundreds less...

The end veiw picture shows a standard flash light shining through the core, that's free flow capability.

Also dissipates heat better due to there design.

Don't be fooled by some other lower priced, welded together units, or some second rate knock off, these are OBD II compliant.

Length - 11"

Body - 4" Round

Inlet - 3"

Outlet - 3"

Brick Type - Ceramic

Price $200 negiotable

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
×
×
  • Create New...