Jump to content
SAU Community

Recommended Posts

Gday fellas,

I'm a new member of the board and im in the market for a R32 GTS-4 5 Speed from prestigemotorsports.com.au

I was wondering since the car is still in japan under auction, I need to find out more details about the car and make sure im 100% happy with it before placing any bids. Im sure some of you have purchased cars through these guys. Through your experience, what kind of things should I be looking out for?

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/
Share on other sites

1) 1989 cars that are almost free theyre so cheap, but will cost twice the repayments just to maintain

2) things that will cost you hundreds or thousands of dollars to rectify once they get here - in order to make the car road legal

3) funny marks in the paint that look like little scrapes but are actually huge gouges in the front bar. especially if it's "pristine and grade 4.

4) anything left in the car for long periods of time on a wharf - it will get broken into and stolen. My advice is to try and ensure that they are taken out of the car until shipping. not all import brokers can / cbf arranging this....

the issue of '89 cars has been discussed a few times - so do a search on it. My opinion is that theyre only an option if you could afford to pay for a mid 90s one anyway. they might look like a lot of bang on a budget - but if you buy a $20,000 gtr, it's not gonna cost the same as a new corrolla to maintain. furthermore - expect to pay for the car several times over in insurance over the first ten years.

89 R32 GTS-4 5 Speed = $7 to 9,--- buy = $3000/year insurance for under 25s.

PM me for any more information.

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/#findComment-454741
Share on other sites

Also if you buy a car in Japan now, and the Government decides to change the ruling from 15 years to 20 years, then ... your farked. I've spoken to a few import people now and they all say that this is more than likely going to happen at some point.

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/#findComment-456586
Share on other sites

nicman, if you are considering using an import broker, ask around - there are a lot of people who have imported cars through PMS and others (myself included).

My advice is to do waay more research than you think you need to - it still wont be enough.

And dont beleive everything you read.

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/#findComment-458736
Share on other sites

Nope,

I cant think of anything worse than having a batch of 15yo 32 Rs on the floor. You've got to realise that a 15yo 32R is going to be a pretty shagged out bit of kit. 26s can generally go 115-120kkm or ten years without needing a freshen up which is rings and bearings bare minimum. Plus the fact that no-one will insure or finance the things. I havent bought a single '89 vehicle (and I can get free lockup storage for as long as I want) even for myself because I honestly believe that the feds will shut the door before its even been opened.

Jash

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/#findComment-460486
Share on other sites

Having brought my import in myself prior to the changes with a low volume compliance plate, I dont think I would go through the same process (although not available anymore) or the new process again. There is just too much government crap/red tape to wade through. I sent my import approval off to canberra 2.5 weeks before the car arrived, after 2 weeks I rang them up to see if it was processed yet, to which I got the reply no sorry you didnt send in a photocopy of you photo id signed off by a JP. The forms made no mention of it and they werent about to ring me up and tell me I needed to get that in to them. So my car got here sat on the wharf for an extra week getting covered in sea salt and costing me money. Its a long drawn out process and to be honnest you could end up getting a dog. Buy one that has been imported by a yard at least you can see it in real life and drive it before you buy it. Importing yourself you have to pay for the car just by looking at photo's it isnt the best. When it comes to buying an R, I'm gonna try and find one locally.

Link to comment
https://www.sau.com.au/forums/topic/21501-import-question/#findComment-460606
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...