Jump to content
SAU Community

Recommended Posts

a few more questions guys...

Any one here used siemens injectors? they do a 800ish cc injector that i can get cheap??

at this stage im not really prepared to put money into a brand i know not alot about!

And more importantly... what computer... im thinking i might be a bit different and step away from power fc but then again thats about all i can get tuned here in tas lol

  • 2 weeks later...
  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Steer clear of the xr6 turbo, boost control is a nightmare with them i found

they're bad in stock form, but you can pick the xr6t turbos up relatively cheap (a mate just got one for $800 with less than 30,000km on it) considering they actually are a gt35r with a larger rear housisng, you just take it down to any decent turbo shop and get them to bore out the wastegate and stick a bigger wastegate flapper and they are fine. I have a couple of mates running more than 550rwhp on the xr6 turbo with the wastegate mod and it holds boost fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...