Jump to content
SAU Community

Recommended Posts

hey im wondering if ppl can post up pics of the their boot install n sub boxes in the boot of their 32 gtr or gts-t.Just wanna get some ideas cos my sub box is too big n to fit it i have no spare wheel.Not cool thanks everyone look forward to seeing them

Link to comment
https://www.sau.com.au/forums/topic/215287-r32-gtrgts-t-sub-box-pics/
Share on other sites

hey mate i don’t have any pic's just yet but i had the same problem that my sub box i had from my old car is just to big for the skyline boot.. I’m in the process of designing and making a custom boot with the fake floor and amps in the floor also. I’m going to use to tyre well and lift it up from there. il give you some info as soon as i get started should be this weekend..

have a good one

niran

hey mate i don't have any pic's just yet but i had the same problem that my sub box i had from my old car is just to big for the skyline boot.. I'm in the process of designing and making a custom boot with the fake floor and amps in the floor also. I'm going to use to tyre well and lift it up from there. il give you some info as soon as i get started should be this weekend..

have a good one

niran

thanks mate thats be good

i went with a small trapezoidal box from autobarn. It only just fits and you will need a sub optimized for a small enclosure to make the most of it.

I managed to fit it while retaining the spare and all boot trim.

I removed it all a month later when i started going to the track :P

  • 1 month later...

You can buy a sealed enclosure for a 12" sub from JB Hi-Fi made by a company called Q-Max. It's just the right size to fit in the R32 boot, you just have to remove the trim over the rear windscreen wiper motor, slide it in, and replace the trim. The enclosure is like $89 or something? Here's a photo of the one in my boot:

post-14331-1212877980_thumb.jpg

post-14331-1212878010_thumb.jpg

I prefer sealed enclosures for their punchiness, anyway. Plus they're smaller so you don't lose as much bootspace. And they look better. :)

Here are some better photos.

post-14331-1212878338_thumb.jpg

post-14331-1212878360_thumb.jpg

You can see in this second photo just how snug the fit is. You can also see why you need to remove the trim over the wiper motor to get it in as well. The good thing about this is that the box is easily held in place.

Edited by HuH

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...