Jump to content
SAU Community

Recommended Posts

As the subject suggests i have a Garret TO4E turbo with a .60 comp and big turbine thats collecting dust since i bought my new GT3540. Turbo just come back from a Garrett dealer with a thumbs up and the whole things has been cleaned and bead blasted (looks like new).

Good for between 400-500hp depndant upon boost. The 57 trim TO4E wheel has a wide efficiency island so you can run it hard or easy and still get good figures from it.

The wastegate is a HKS 35MM. Perfect for this turbo application.

$1500 for the lot?

email me if your intrested:

[email protected]

Heres a few pics:

Link to comment
https://www.sau.com.au/forums/topic/21581-t04e-hks-wastegate-for-sale/
Share on other sites

Fatz: Sorry No manifold

Al: The exhaust cover is pretty big =) 1.32 A/R But it shouldnt cost that much to get a smaller cover exchanged, if it costs anything at all !?

Also

If anyone wants to see the turbo & wastegate, i have it in melbourne today. (i work in melb/CBD).

drop me a line [email protected] and we will meet up.

Cheers,

Trev

water & oil cooled.

Yup the turbine is fairly large, set up for top end drags. No prbs getting a smaller a/r turbine though, TO4's are pretty common. Comp wheel is pretty standard size for 500+.

Not to mention it would cost next to nothing to change the exhaust housing of the turbo, to somthing smaller.

Il drop it down to $1400, for anyone who is seriouse

Cheers,

Trev

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...