Jump to content
SAU Community

Recommended Posts

anyone know if r33 dash mats are available as an off the shelf item anywhere or even if there made at all?

i know they dont look that good but the dashs in the r33 are pretty large and i would like to protect it, apart from just putting the spray on cleaners and protectors on it.

Link to comment
https://www.sau.com.au/forums/topic/21616-r33-dashmats/
Share on other sites

There was a thread on this early last year a place in WA makes them and Black is the only one to get ...the grey looks sh*thouse they cost around $43 and if you do a search and find the company your local Aussie Auto can get them for you . They look better than the one shown at cargear.com and a lot less money

Link to comment
https://www.sau.com.au/forums/topic/21616-r33-dashmats/#findComment-459944
Share on other sites

The Shevron Dashmate in black is the one I got . The East Coast distributers are Command Auto Group 02 9714 0900. My local Aussie Auto shop got mine in for me cost about $43. Its been on for over a year now and has never moved and still looks good but as I said Black is the only colour to get.

www.shevron.com.au

Link to comment
https://www.sau.com.au/forums/topic/21616-r33-dashmats/#findComment-460887
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...