Jump to content
SAU Community

Recommended Posts

Hey all

I am thinking of bying a bike and need your advice on what exactly to get for the first bike

I was actually chosing between the cbr 250 and ninja 250... what would you say be better for a beginner?

Im also open for other choices, but from what i know these two are the top choices in 250s

And im a girl, so looks DO matter :rofl:)

Link to comment
https://www.sau.com.au/forums/topic/216987-advice-please/
Share on other sites

i too am looking at my first bike and from what i have found and ahve been told is the cbr 250 id the best learner bike around. there reasonably cheap, look good and they are quick.

so if i were you id look for a good cbr and go for that. i know thats what im doing.

:rofl:

Link to comment
https://www.sau.com.au/forums/topic/216987-advice-please/#findComment-3831045
Share on other sites

Quite a few of my mates road Zeals on their L's and P's.

Good, sensible bike. The engine is torquey across most of its rev range, unlike the CBR 250RR which needs to be revved all the way to its 18000RPM redline to go anywhere. Its reasonably small and light, which is great if you're not big. The chassis is pretty benign, with very predictable handling.

Does your state have L and P plater restrictions on bikes? That will also factor into your choices.

Link to comment
https://www.sau.com.au/forums/topic/216987-advice-please/#findComment-3831053
Share on other sites

Hey all

I am thinking of bying a bike and need your advice on what exactly to get for the first bike

I was actually chosing between the cbr 250 and ninja 250... what would you say be better for a beginner?

Im also open for other choices, but from what i know these two are the top choices in 250s

And im a girl, so looks DO matter :D)

Personally? Honda VTR. Looks like a Ducati Monster but smaller. Has all the 250cc advantages plus:

Low-ish weight: 140-ish kg dry, a few kg less than most others in the class

Not a faired bike: When you accidentally drop it for the first time it will cost you much less.

V-Twin: They're torquier down low (ha on a 250 :) and easier to come to grips with than an inline 4.

What you probably want to do is go ride a bunch of them before you purchase - you might

find one thats "you" more than the others. Get your L's: try out learner-legal mates bikes;

do a riding course that lets you try a few different bikes out; or test-ride at a store if you can

convince them :dry:

Regards,

Saliya

Link to comment
https://www.sau.com.au/forums/topic/216987-advice-please/#findComment-3831665
Share on other sites

the best advice i can give you is to buy a cb250, as your a learner your new to the biking lifestyle your more than likely to have an accident i know i did and it wasn't even my fault. cbr250rr are overpriced import that is close to 20years old, these bikes are imported given a lick of paint and sold as a newish bike there nothing wrong with that but its like buying a skyline.

Link to comment
https://www.sau.com.au/forums/topic/216987-advice-please/#findComment-3831950
Share on other sites

ZZR250's are great, that was my first road bike. Stay away from bikes that that to peaky in revs or power delivery - not fun to drive in traffic. as suggested ride a few to see what you like. A good alternative is the road trial (i.e. the DRZ above) - allows you to mount kerbs with ease and more comfortable at traffic speeds (nice to haev the upright position.

lots of choice, don't spend too much (likely you will throw it up the road at some stage)

most importantly - GET THE BEST TYRES AVAILABLE! yes they will cost, but worth every penny...

Link to comment
https://www.sau.com.au/forums/topic/216987-advice-please/#findComment-3832324
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...