Jump to content
SAU Community

Recommended Posts

heaps of stuff for sale off my stock setup, selling as ive built a new engine, located on gold coast, will ship parts

2 for sale options-

OPTION 1 -

seperate parts off r33

rb25 det engine,head and block, in running order - 1000

rb25 turbo, with lines, manidolf, dump pipe, intake hose, heat sheild, elbow - 320

stock plenum and runners - 150

stock injectors with rail - 100

stock injectors- 80

02 sensor - 50

standard boost solenoid - 20

air flow meter - 80

stock exhaust manifold - 50

stock intake pipe with plum back bov and return to turbo intake - 100

stock intake no bov - 30

throttle body- 50

ignitor and loom - 100

standard coilpacks - 150

altenator - 50

flywheel- 100

starter motor - 80

full wiring loom - 150

auto ecu - 100

turbo heat sheild and maifold heat shield - 50

chromed exhaist manifold heat sheild - 80

custom alloy top feed fuel rail- 80

stock pair of r33 wheels stuffed tyres - 50

might have forgoten some things, ask me i might have it, will take reasonable offers on parts

or OPTION 2

rb25 det engine with turbo and all stuff needed to do an engine transplant/swap or whatever - 2000

pics coming soon

pm me for further details

cheers

rodney

Link to comment
https://www.sau.com.au/forums/topic/216990-shit-load-of-r33-parts-engineturbo/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

pics added

also now selling an exhaust combo form the diff back. this includeds the 7'' stainless canon with 5 '' tip and just a stock quiet muffler. both are madel to join onto the exhaust were the diff is which bolt up flanges, for a 3" system. muffler is new, used once to clear defect, canon is couple years old but still good.

with canon car is nice and loud, with muffler, passes exhaust inspection so near stock. it cost me 280 to get made and the canon cost me 400. sell both for $350!!!

post-9180-1209599471_thumb.jpg

post-9180-1209599486_thumb.jpg

post-9180-1209599503_thumb.jpg

post-9180-1209599516_thumb.jpg

post-9180-1209599536_thumb.jpg

post-9180-1209599551_thumb.jpg

post-9180-1209599573_thumb.jpg

post-9180-1209599592_thumb.jpg

post-9180-1209599636_thumb.jpg

post-9180-1209599648_thumb.jpg

post-9180-1209599666_thumb.jpg

Edited by GOR33

nah no exhaust

how do u tell the difference between series one and 2 coil packs? is there a code or something on them? im pretty sure there just series one coil packs. whatever they are they look new

Edited by GOR33

rod im pretty sure urs a series 1 packs, on the back on the coil cover is the ignitor there? u got so much chrome i forgot whats what lol, coz series 2's like my stockers were have the ignitor built in

ben...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...