Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Exedy 5 puk clutch - used for about 3000 kms... hardly worn, couldn't hold the 300rwkw... was fine at 270rwkw though!

$300 ono

still got it??

will pay now!

NPC rebuilt OS Giken TS2 twin plate clutch - Basically brand new except the splines are damaged on the friciton plate (riveted hub needs replacing on one of the plates) - push type $500 firm

where is npc at?

how many kays since rebuilt??

cheers

NPC rebuilt OS Giken TS2 twin plate clutch - Basically brand new except the splines are damaged on the friciton plate (riveted hub needs replacing on one of the plates) - push type $500 firm

where is npc at?

how many kays since rebuilt??

cheers

NPC are in QLD.... although you don't need to get it repaired there. Although would be the cheapest option.

http://www.npcperformance.com.au/

1500km at most.... splines were damaged due to faulty input shaft... uploading some photos now..

npc rebuilt (jacobson spec plates)

os giken ts2bd. (not damperd anymore)

post-19586-1211797006_thumb.jpgpost-19586-1211796902_thumb.jpgpost-19586-1211796749_thumb.jpgpost-19586-1211796510_thumb.jpg

the "g box" one has the dammaged spline. pulled out due to motor rebuild. drove fine but upgrded to a r3c.

advan 048 semi slick race tyres.

20% worn. $385 a set. ($450 each new lol)

235-45-r17. medium/hard compound.

post-19586-1211797499_thumb.jpg

post-19586-1211798484_thumb.jpg

these have been used for 1 practice session at barbagallo.

porsche cup car slicks.

24-64-18.

aka 240-40-18.

these are almost completly new. again used for only one practice session. new tread depth is 3.1mm the LOWEST on these is 2.4mm.

so around 15% worn on average.

$600 a set.(4) ($550 each new)

post-19586-1211799376_thumb.jpg post-19586-1211799560_thumb.jpg

6 available total. (2 on hold.)

also available is the rear. big ass gibson gtr size. (if you can fit 275's under the rear of you car these will fit.)

27-68-18.

aka 270-45-18.

also only about 15% worn.

350 a pair.

post-19586-1211800073_thumb.jpg post-19586-1211800894_thumb.jpg post-19586-1211801011_thumb.jpg

r32 gtr gearbox partly dissasembled.

smashed input shaft. suit rebuild or gearset upgrade.

$250 post-19586-1211859433_thumb.jpg post-19586-1211859312_thumb.jpg

r32gtr gearbox smashed 3rd. complete un-opened.. suit gearst upgrade or rebuild. still drives fine with no noises except no 3rd lol.

$350 post-19586-1211859605_thumb.jpg

in the first post theres the 32GTR box and the 33GTS-4. but you've listed 2x 32GTR boxes?

is there a typo?

interested in the 33 box but not the price.

advan 048 semi slick race tyres.

20% worn. $385 a set. ($450 each new lol)

235-45-r17. medium/hard compound.

post-19586-1211797499_thumb.jpg

post-19586-1211798484_thumb.jpg

these have been used for 1 practice session at barbagallo.

hey there

20% worn meaning theres 80% left still??

thanks

in the first post theres the 32GTR box and the 33GTS-4. but you've listed 2x 32GTR boxes?

is there a typo?

interested in the 33 box but not the price.

They are one of each, but are the same thing. Only difference is the 33 bell housing is more strengthened than a 32 one. Both are push type, both suit a 32 GTR...

Pm offer, these boxes are Daves not mine so it isn't my call :down:

hey there

20% worn meaning theres 80% left still??

thanks

Yes, there is still 80% left :down:

ok, first post updated as of 6.6.08....

All irrelevant posts of mine have been deleted to clean the thread (ie sold items)

Cheers

Anna

If they are not picked up i will take them, need to be sent to Vic though

Hey Roy,

no dramas, il let you know if they don't get collected :)

Can work out freight etc then

mind shooting me a pm of the Rb26 please ? :( thanks! :D

no dramas, Il get Dave to send you one today. :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...