Jump to content
SAU Community

Recommended Posts

ok so i came across this thread on G35driver..

http://g35driver.com/forums/showthread.php?t=199456

and it turns out that in the USA, all G35's that have power seats have the heater elements pre-wired into them!

all you have to do is find the plug under the centre console and plug in the OEM switches and the heaters work

note that this is on the sedan in the above thread

so i was thinking, i wonder if the seat setup is the same for the V35? i know that heated seats were offered on the 70th anniversary V35's

it would be easy for us to simply use fast to see if there are different part numbers for the different seats. if not, and they have the same part number then its probably simply that the seat is the same but usign a different cover for the 70th anniversary seats

i have ordered a set of the switches from the USA but unfortunately i cannot find the said plugs in my car as they are pictured on the sedans in the above thread. i am hoping they are jammed away in a hidden spot somewhere or slightly different for the coupe.

maybe someone else can pull their centre console off to have a look if they have the plugs?

let's hope we have unlocked a nice hidden secret here!

cheers,

Warren

Link to comment
https://www.sau.com.au/forums/topic/217106-heated-seats-on-all-v35s/
Share on other sites

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

ok so i came across this thread on G35driver..

http://g35driver.com/forums/showthread.php?t=199456

and it turns out that in the USA, all G35's that have power seats have the heater elements pre-wired into them!

all you have to do is find the plug under the centre console and plug in the OEM switches and the heaters work

note that this is on the sedan in the above thread

so i was thinking, i wonder if the seat setup is the same for the V35? i know that heated seats were offered on the 70th anniversary V35's

it would be easy for us to simply use fast to see if there are different part numbers for the different seats. if not, and they have the same part number then its probably simply that the seat is the same but usign a different cover for the 70th anniversary seats

i have ordered a set of the switches from the USA but unfortunately i cannot find the said plugs in my car as they are pictured on the sedans in the above thread. i am hoping they are jammed away in a hidden spot somewhere or slightly different for the coupe.

maybe someone else can pull their centre console off to have a look if they have the plugs?

let's hope we have unlocked a nice hidden secret here!

cheers,

Warren

That looks like a great little mod if it works! I would investigate but haven't got my car yet :yes:

i know it sounds great

i am really dissapointed that i couldn't find the splugs under my console now

but i'm hoping skizo clears up the seat issue as if the seat has all the hardware already then its going to be easy to wire up a switch whether its got a connection on the loom or not..

i know it sounds great

i am really dissapointed that i couldn't find the splugs under my console now

but i'm hoping skizo clears up the seat issue as if the seat has all the hardware already then its going to be easy to wire up a switch whether its got a connection on the loom or not..

As Chris confirmed that there do has a plug under, I am really thinking order a pair of swith:)

i know, its frustrating that jon's are right in front of your eyes!

even all the pics that i have seen of cars on g35driver they are all very visible, be it coupe or sedan, although its been impossible to find any exposed dash pics on g35driver..

eg this pic, although this car already has the switches as standard: http://g35ipod.com/images/install/25.jpg

i might have another look tomorrow. it seems the correct part of the loom runs down the passenger side of the console. but failing that, i might have to leave it for you in a few weeks time chris..

in th meantime, everyone else go have a lok to see if you have the plugs!

less typing, more searching!

The link you provided is the same one I read only a few days ago. My thoughts were that the seats were a bit of an unknown as in the example used were swapped seats.

Did I miss something?

yeah you are getting confused - there were 2 similar posts about this on g35 driver..

but the crux of this thread was that they found that the loom and heating elements are already there in the STANDARD seats as long as they were the power seats and not the manually operated seats

this is on the sedans anyway, and jons car (also sedan) has the plugs poking you in the face when you look at it

i'm hoping that on the coupe they are tucked away somewhere but to be honest it didn't look like it when i had a brief look earlier today

jon,

if yo get me the switches I'll set it up. in the mean time I'll work yours out. if they are there then you are not swapping seats are you

:laugh:

Hmmmm..heated seats....leather seats....heated seats...leather seats...nah I think I'll have both thanks!

No. but i have one of these...... will it do?

post-49637-1209554674_thumb.jpg

NO!!

they are good for popping airbags. think there are 8 or so on these so I would only use a meter in them. if it is a LED one then that is a different story. still prefer a meter.

jon,

I'm bored so I'm tearing yours to bits.

hey mate,

looks like a sedan?

were they just sitting there or hidden?

Yes its a sedan, and yes they were hidden underneath the black air-con vent that goes to the rear. Had to rip off some tape and pull the wires out, I could feel the plugs though so I knew they were there.

Fingers crossed that this will work. I was so disappointed that my car didn't come with heated seats.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...