Jump to content
SAU Community

Recommended Posts

"Intercooler Upgrade

The GTR Nissan Skyline intercooler runs out of its efficiency range at power levels above 300rwkw and needs to be upgraded. Many aftermarket bolt on kits are available for the GTR starting at around AU$1000 but as with most things you get what you pay for. Be aware a small decrease in throttle response may be noticeable due to the extra piping and larger core size. "

from http://nissanskyline.6te.net/tuning_GTR2.htm

Link to comment
https://www.sau.com.au/forums/topic/217311-gtr-cooler/#findComment-3837022
Share on other sites

Dont believe that website - its a load of shit half the stuff that's on it, the other stuff was just ripped from these forums.

Dirty wanker that copied/pasted DIY threads, FAQ threads and didnt even have the decency to thank/credit users and then puts copyright down the bottom? Absolute joke.

Anyhow - You can get away with upto 350rwkw without much issue.

Either way, more than enough for the turbo of your choice there :D

Link to comment
https://www.sau.com.au/forums/topic/217311-gtr-cooler/#findComment-3837160
Share on other sites

hey mate.Ive seen a gtr cooler pump out 480 rwkw in a rb26 powered 300zr.Big boost levels n it was fine.If know one beleivevs me ring autostyle.

I also have a stock gtr cooler 4 sale if interested.Excellent condition make n offer

Link to comment
https://www.sau.com.au/forums/topic/217311-gtr-cooler/#findComment-3840362
Share on other sites

  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...