Jump to content
SAU Community

Recommended Posts

Hey guys ive got an HKS intake piping kit for sale, which I bought off Yahoo Auctions Japan, but since I havent fitted it yet and I need some extra cash, this is up for sale.

Basically what this kit includes is polished piping for everything on the turbo side of the engine. Any piping that can be seen is replaced, such as the "twin turbo" pipe and the Y pipe down to the intercooler, and piping from the air filters to the turbos. This is a picture of the actual kit, but I sold the mushroom filters separately a while back, as I was going to use my Apexi pods with em instead.

post-20525-1209821170_thumb.jpg

Im asking $720 for this awesome bit of gear, which used to retail for over a grand.

Link to comment
https://www.sau.com.au/forums/topic/217586-hks-intake-piping-kit/
Share on other sites

can you still run afms with this kit?

and im just abit lost coz i got trust cooler piping on atmbut 1 pipe comes off the plenum, the other off the twin turbo pipe and 2 of the cooler, let me know what this will exacely replace and that if i can still run afms,

cheers tony

can you still run afms with this kit?

and im just abit lost coz i got trust cooler piping on atmbut 1 pipe comes off the plenum, the other off the twin turbo pipe and 2 of the cooler, let me know what this will exacely replace and that if i can still run afms,

cheers tony

x 2

Yes, you can definitely still run AFMs, if you will look at the pipes with the pod filter thats on the left. Between the 2 hoses you can see a bit of a black pipe. That was probably used by the past owner to replace the space for the AFM. For the right one, you'll just need another hose to do the same thing as the one on the left, if you get what i mean.

Basically i cant be certain about the compatibility with the Trust piping, but this replaces the twin turbo pipe + a little bit more. So basically the piping ENDS just before it goes down into the hole in the chassis to go to the i/c area. So you should see a bit of your i/c piping come up from the hole to join up to this i think.

^ Does it come with the hose?

If this doesnt sell, I may grab that off you and fit it to my car instead.

Which hose? It hooks up to the stock BOV pipe, and goes up to the plenum. Ive got the joiners if thats what you mean?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...