Jump to content
SAU Community

Recommended Posts

Item: Defi Gauges, Heads Up Display and Control Unit 2

Age:New and used

Condition:excellent

Price: Stated below

To Fit: (What car)

Location:Melbourne

Contact:0412 005 791 or PM me

Comments: Not needed anymore. Price is negotiable. Not entirely sure what these items retail for at the moment so throw me some offers.

Hi,

I have some Defi goods for sale. The gauges are unused and still in boxes, while the control unit is used but has all the required wiring,

1. 60mm Blue face Defi Boost gauge ($200)

2. 52mm Oil temp gauge ($150) (Not BF gauges)

3. 52mm Oil pressure guage ($170) (Not BF gauges)

4. Defi Control Unit 2 ($70)

5. Defi Heads Up Display ($300) -> This display can be hooked up with the gauges to show data such as boost, oil temp, oil pressure etc. It also shows Speed and perhaps Revs.

Price is negotiable. I will sell the whole lot at a cheaper price. Throw me some offers.

Located: Eastern Suburbs Victoria

Reason for sale: No longer needed

Thanks,

Jon

Edited by silkishuge

Hey mate..

Had a look at the Defi HUD.. What is needed?.. I assume that you need some sort of Defi control unit?.. Do you need the specific gauges for it to be shown in the HUD? What else is needed?

Hey mate..

Had a look at the Defi HUD.. What is needed?.. I assume that you need some sort of Defi control unit?.. Do you need the specific gauges for it to be shown in the HUD? What else is needed?

You will need a Control Unit and if you want to display other information, you will also need to purchase the sensors separately. Alternatively, you can buy the oil pressure and temperature gauges, which will also have the sensors you need. You will find that buying the sensors separate, will cost nearly as much as buying them with the gauges.

Jon

pm sent for control unit & boost gauge

Control Unit 2 and boost gauge have been sold.

Thanks for interest.

Alot of interest in the oil temp and oil pressure gauges but awaiting someone who has told me he wants the item over the phone but has not PM me yet to identify himself.

PRICE DROP on HUD -> ($230)

Thanks,

Jon

If you look at the price in Yen, at todays conversion would still require about $180 for the oil temperature gauge and $250 for the oil pressure gauge.

Jon

If you look at the price in Yen, at todays conversion would still require about $180 for the oil temperature gauge and $250 for the oil pressure gauge.

Jon

Defi HUD is now sold.

Items remaining are the oil pressure and oil temperature gauges.

Thanks,

Jon

are the oil temp. and press. gauges new?comes with all the required sensors,wirings etc?oh..and what color does it light up?do have the model of it?

Edited by GReddy_ES8
are the oil temp. and press. gauges new?comes with all the required sensors,wirings etc?oh..and what color does it light up?do have the model of it?

The oil temperature and oil pressure gauges are new and have never been installed in any car. They come with all the required sensors. I do not know what colour they light up because I have never used them before.

This is taken from an advertisement of the gauges:

Defi-Link Meters are electronic gauges which are high response and refined design.

Defi-Link Meters need to be connected to Defi-Link Control Unit II.

Up to 7 gauges can be connected and controlled by one Control UnitII. The name of the connection system is "Defi-Link System." Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system. Each gauge has two LEDs. One LED illuminates when the gauge pointer exceeds a warning value which is discretionary with the Control Unit II. The other LED illuminates when the gauge pointer exceeds a past maximum value.

FeatureNote

Gorgeous Opening mode: During the opening mode, wire disconnections, short circuits, and serial errors are checked automatically. When errors are found, LEDs light up in order.

Full-lineup: boost(for turbocharged and supercharged engines), intake manifold pressure(for natural aspirated engine), oil pressure, water temperature, oil temperature, fuel pressure, exhaust gas temperature and tachometer. White and black gauge

dials are available. A bright transparent green gauge dial and a red instrument needle pointer are used in the gauges to increase visibility at night and in low-light conditions.

The scale of 4 1/2" gauges is compressed to acquire great visibility and ease of use. Wide-angle scale is used at the idling range 0~1,000RPM. The scale is fitted to recent engine power band and linear scale is used from 3,000RPM to 11,000RPM.

NEW Regular Position Bezel is attached to 52mm gauges. The bezel enable user to find a subtle change in car by setting

the position of the red triangle depending on the driving situation.

Driving data can be stored and can be replayed up to 3 minutes.

Double Warning function by a meter's LED lamp and a beep

If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED lights.

Defi-Link Indicator can be connected with each meter.(Defi-Link Indicator is standard option for 4 1/2" and 3 1/8"

Defi-Link Meters.)

Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are

nstalled.(*3)

Defi-Link Control Unit II or Defi-Link Control Unit is necessary to operate Defi-Link Meter.

Defi-Link Meters are applicable to 12V vehicles only.

Hope that helps.

Jon

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...