Jump to content
SAU Community

Recommended Posts

Hey guys,

As most of you are aware this new option that Just-Jap provides is a fantastic solution to dodge the hacking of the drivers side engine bay that you have to do for other intercooler installs. Which is very illegal if you have a R33 with Airbags.

However the question that i raise now, even though there is NO cutting of a whole in the engine bay for these new kits, is it legal to have a FMIC mounted on a R33 with airbags? or is it still illegal to even have a FMIC mounted cause it may interfere with airbags still?

Im really keen on these kits but still unsure on how legal these are.

P.S i would run the stock airbox so the FMIC would act as my 1 intake mod :P

Thanks

Link to comment
https://www.sau.com.au/forums/topic/218034-cooling-pro-stealth-fmic-legal/
Share on other sites

As u said in Vic you are allowed an intake mod, so the FMIC would be legal. Do u know where the airbag sensors are located ? If u dont need to relocate the sensors then it should be ok. Speak to the regulatory authority in your state. Vicroads?

EPA rule states ONE intake mod

So Pod OR FMIC

There is a massive full detail EPA thread in the Vic section

http://www.skylinesaustralia.com/forums/Ep...Th-t156269.html

Cheers.

I fully understand these intake EPA laws and i intend to follow them, however im asking whether having a FMIC on an R33 with airbags is legal or illegal (when using Just-Japs new intercooler kits that you dont need to cut holes for)

these puppies http://www.skylinesaustralia.com/forums/Co...er-t209304.html

or is it still illegal cause it play an impact on airbags when hit from the front ?

cheers

Probably LOL but would u want to run a pod?

I think id prefer the stock air box.

Quiter and cooler air :laugh:

Yeah i have a K&N panel filter at the moment. If i was to go to POD then i would most likely build a new box from fibreglass or something incorperating the factory snorkel etc. Not really thinking too seriously bout that at moment tho.

With the R34 SMIC ya can barely tell the difference from the outside (of course duh) but even when you look under the car, the drip tray plastics hide it all anyways and the intake ducting makes it hard to see too. :(

All good for me tho. lol

Hrmm...

Now i have to make the decision whether to get one of these stealth Just-Jap kits or run a R34 SMIC.

Mods:

Exhaust (3")

BC (12psi)

what would u do ?

Personely I would go with the FMIC. It is legal on your car and has a large serface area for cooling, with pretty good flow and little persure drop.

I have a FMIC in the stealth style (made it myself) and I painted it black for the extra stealth look.

But thats just me, SMIC is still a very good option.

post-43220-1210077191_thumb.jpg

Yeah i have a K&N panel filter at the moment. If i was to go to POD then i would most likely build a new box from fibreglass or something incorperating the factory snorkel etc. Not really thinking too seriously bout that at moment tho.

With the R34 SMIC ya can barely tell the difference from the outside (of course duh) but even when you look under the car, the drip tray plastics hide it all anyways and the intake ducting makes it hard to see too. :(

All good for me tho. lol

Did you notice a difference when fitting the 34 cooler? or much of a muchness from the stock.

They go for about $150?

Personely I would go with the FMIC. It is legal on your car and has a large serface area for cooling, with pretty good flow and little persure drop.

I have a FMIC in the stealth style (made it myself) and I painted it black for the extra stealth look.

But thats just me, SMIC is still a very good option.

Who did your pipework ? How big is ur core ? 600 x 300?

I have a 600 x 300 x 70 core already but i would need the pipework made up to run back underneath the core, but doing this i am also affraid if will hang to low below my front bar. Hence why im asking what size ur core is.

Does ur underneath pipe hang lower than you front bar?

Who did your pipework ? How big is ur core ? 600 x 300?

I have a 600 x 300 x 70 core already but i would need the pipework made up to run back underneath the core, but doing this i am also affraid if will hang to low below my front bar. Hence why im asking what size ur core is.

Does ur underneath pipe hang lower than you front bar?

My core is a HKS 600 x 300 x 70 and I used BLITZ piping and welded the angled return onto the side of the cooler myself at work, on their time. :(

It all went together pretty easy.

I have an M-SPORTS front bar and it covers the piping fine. The M-SPORTS bar is only a little lower than a stock bar. The stock one should cover the piping as long as you mount your cooler to the underside of the bumper re-enforcement.

My core is a HKS 600 x 300 x 70 and I used BLITZ piping and welded the angled return onto the side of the cooler myself at work, on their time. :(

It all went together pretty easy.

I have an M-SPORTS front bar and it covers the piping fine. The M-SPORTS bar is only a little lower than a stock bar. The stock one should cover the piping as long as you mount your cooler to the underside of the bumper re-enforcement.

Just a quick question.

Why didn't you hide the return pipe behind the fmic, instead of coming back under it.

I think it would look a lot neater and make fark all difference to the flow of the cooler.

EAS Performance did all my piping and fabrication work on my car. Contact details below.

Old Setup:

post-1811-1210078978_thumb.jpg

New Setup:

post-1811-1210079094_thumb.jpg

My core is a HKS 600 x 300 x 70 and I used BLITZ piping and welded the angled return onto the side of the cooler myself at work, on their time. :(

It all went together pretty easy.

I have an M-SPORTS front bar and it covers the piping fine. The M-SPORTS bar is only a little lower than a stock bar. The stock one should cover the piping as long as you mount your cooler to the underside of the bumper re-enforcement.

I have a m sports front bar too....my core is a little different to yours but. outlet is lvl with the bottom of the core.

so if i made an underneath pipe like urs the 180 bend would be alot sharper. I called up a few mobs and they wanted something like 200-300 bucks for the pipe... so i figured it wouldnt be worth it.

Extra couple hunder and i can get a new kit :S

Plus 200-300 bucks was step if it were to hang down and get caught on every speed bump!!

Just a quick question.

Why didn't you hide the return pipe behind the fmic, instead of coming back under it.

I think it would look a lot neater and make fark all difference to the flow of the cooler.

EAS Performance did all my piping and fabrication work on my car. Contact details below.

Old Setup:

post-1811-1210078978_thumb.jpg

New Setup:

post-1811-1210079094_thumb.jpg

How much u recon EAS would charge to make a pipeup like ~R33AzzA~'s.

All workshops i called up said about 200-300 which i found pritty step, but then they told me it was alot of work involved :S unless they just didnt wanna do it hahaha

It just seems there isnt enough room to run it behind / under like ur suggest and seems it would hang down alot.

I have a m sports front bar too....my core is a little different to yours but. outlet is lvl with the bottom of the core.

so if i made an underneath pipe like urs the 180 bend would be alot sharper. I called up a few mobs and they wanted something like 200-300 bucks for the pipe... so i figured it wouldnt be worth it.

Extra couple hunder and i can get a new kit :S

Plus 200-300 bucks was step if it were to hang down and get caught on every speed bump!!

You can make your own piping, buy some exhuast bends (mandrel) and some tube, tack it together and get someone to finish welding it.

It might be mild steel but its easy to do, and not to expensive. If you need tube I can supply some to you as I have a heap of 2.5 inch tube at work.

Mandrel bends are avalible at truck bits for around $10 bucks a bend (don't quote me on price).

Thoughts on mild steel piping? Painted on the outside of course.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...