Jump to content
SAU Community

Recommended Posts

Heavy Duty Organic clutch kit (240rwkw), $335

Heavy Duty 5 Puk Button clutch kit (300rwkw) , $439

Heavy Duty Cushion Button clutch kit (260rwkw) , $445

Exedy (SC) Cerametallic 3 Puk Button clutch kit (330rwkw), $610

http://www.skylinesaustralia.com/forums/Ch...us-t200652.html

From sliding performance, all are far better than a stock Nissan clutch... and at a far more reasonable price.

All Sliding's advertised prices are around what I'd generally pay elsewhere.

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

I really don't think it's gonna fry your pads or make your gearbox/clutch explode if you do it either way...

If it did it would probably take eleventy billion years.

Or better yet, don't change gears or brake at all... or turn your car on because it puts wear and tear on it...

Fear mongering I think.

If it's wet I put the clutch in and rip the handbrake on then hold the car at a 45 degree angle as I approach the lights. Tyres don't wear in the wet,

LOL!!!!

I know your taking the p1ss, but something quite sad is there are people that get out in the rain and do their burnouts, not because the car is just so sh1t it cant spin in the dry (that's only 1/4 of the reason) but because they genuinely believe they are NOT wearing tires out, because tires dont wear if it's wet.

There ARE sad people around.

Back on Topic, I use the gears to slow me down, it's how I was shown to drive, and I feel I have control over the car, if something comes up and I suddenly need to accelerate, I am in gear and I just put the foot on the correct pedal, no shuffling for gears, having to guess the correct gear, it's already there.

Some of the arguments against backing off in the gears are that the box wasn't designed for reverse power transfer (power from wheels to motor), that replacing brake pads is quicker and cheaper than a clutch/gearbox, etc but there is also the issue of the law requiring that the driver always be 100% in control of the vehicle, and this also includes being in gear when applicable (you can neautral at the traffic lights with the clutch out, but otherwise unless driving changing gears, the vehicle should always have a gear engaged (not that this law is ever policed, but it's another law that's there if the cops are clutching at straws to book someone).

B.

LOL!!!!

I know your taking the p1ss, but something quite sad is there are people that get out in the rain and do their burnouts, not because the car is just so sh1t it cant spin in the dry (that's only 1/4 of the reason) but because they genuinely believe they are NOT wearing tires out, because tires dont wear if it's wet.

There ARE sad people around.

Back on Topic, I use the gears to slow me down, it's how I was shown to drive, and I feel I have control over the car, if something comes up and I suddenly need to accelerate, I am in gear and I just put the foot on the correct pedal, no shuffling for gears, having to guess the correct gear, it's already there.

Some of the arguments against backing off in the gears are that the box wasn't designed for reverse power transfer (power from wheels to motor), that replacing brake pads is quicker and cheaper than a clutch/gearbox, etc but there is also the issue of the law requiring that the driver always be 100% in control of the vehicle, and this also includes being in gear when applicable (you can neautral at the traffic lights with the clutch out, but otherwise unless driving changing gears, the vehicle should always have a gear engaged (not that this law is ever policed, but it's another law that's there if the cops are clutching at straws to book someone).

B.

Haha gold....that's not smoke coming off my tyres man it's evaporating rain causing steam!!

As for the car control neutral issue...that's exactly how I was taught over 20yrs ago. So it must be right :)

Probably more chance of warp/hotspots from using the coast/brake method than a combo of gearing and brakes...less load on the brakes = less heatsoak through pads/rotors and calipers.

Lol, heatsoak? When stopping at traffic lights?

I don't see how that could happen on the streets doing normal driving or even spirited driving.

Lol, heatsoak? When stopping at traffic lights?

I don't see how that could happen on the streets doing normal driving or even spirited driving.

I live in the hills, heatsoak isn't hard to achieve...

Done much spirited driving? :P

I live in the hills, heatsoak isn't hard to achieve...

Done much spirited driving? :P

Oh ok, I keep forgetting I'm running aftermarket slotted rotors, braided lines, and I don't know what pads I'm running (came with the car from Japan).

Yes I have done spirited driving and a track day at Sandown, the pads last 4 hot laps before they start getting soft on street tyres.

I don't live in the hills but I keep forgetting that when I bought my 'line it wasn't stock in the first place so I'll withdraw that comment, I don't know what stock brakes feel like.

Can I just ask something..

People are saying alot of "staying in control you need to be in gear" and "in case i need to accelerate"..

One question..

When do you ever need to accelerate when there is a red light and cars already stationary at the lights?.. For what reason would you ever want/NEED to accelerate towards a stationary/a red light with cars comming from both left and right sides?

Can I just ask something..

People are saying alot of "staying in control you need to be in gear" and "in case i need to accelerate"..

One question..

When do you ever need to accelerate when there is a red light and cars already stationary at the lights?.. For what reason would you ever want/NEED to accelerate towards a stationary/a red light with cars comming from both left and right sides?

Some idiot starts reversing out of a drive beside you? Some idiot pulls out from a parking space beside you?

Frankly, what does down-shifting do other than waste fuel on the heel-toe? If you are in a position where you need to stop fairly quickly, you probably don't have time to down-change. If you have plenty of time, friction (in the drive train) will do most of the slowing for you.

Yeah, I agree, which is why I coast. As well as the fact that I suck at heel and toeing so when I downshift the car jerks a crapload.

i like to do abit of downshifting or braking in gear then clutching it as i come to a stop, rolling in neutral will fail you your driving test in WA. also when downshifting you dont need to heel toe, i take the foot off the brake for a split sec to rev-match and put it back.

Some idiot starts reversing out of a drive beside you? Some idiot pulls out from a parking space beside you?

And you swerve onto the other side of the road into oncoming traffic (with some space there to make it back), you need to accelerate to get back into the LHS of the road before the oncoming traffic hits you but your in neutral and....

i like to do abit of downshifting or braking in gear then clutching it as i come to a stop, rolling in neutral will fail you your driving test in WA.

but to be honest...we are not talking about a driving test here. and the things you do in a driving test, you most likely won't do in day to day driving. for example...having your radio OFF while driving :happy:

Just think about what is cheaper at the end of the day, your engine or your brakes.

Engine was designed to accelerate not deccelerate. Even race cars, if they can get around the matter of having to lose all that energy, for the spped theay are normaly doing ( which you dont have slowing down on a red light ) they will not opt to gear down but coast it around the corners. Most drag cars shut down their engines once over the finish line, but that is a slightly more complicated matter, so I will not go there.

Brakes are cheap, use them. You odds of having to avoid anybody doing anything stuppid, at 30 - 40 kph is very small to nonexistent.

:happy:

Or some young idiot, in a hotted up hoon-mobile, comes around the corner totally out of control. If you can't accelerate and get out of the way, say goodbye to your wheels.

How about a $$$ reason - when you are slowing down with clutch still engaged, the injectors are not working, until revs drop to around 1500. If you clutch in, the engine goes to "idle", and the injectors start working to keep the engine running.

So, coasting into a stop with clutch engaged saves fuel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...